Sketcher SelectElementsWithDoFs/es

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher SelectElementsWithDoFs and the translation is 8% complete.
Outdated translations are marked like this.


Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский

Sketcher SelectElementsWithDoFs.svg Sketcher Select solver DoFs

Ubicación en el Menú
Sketch → Herramientas de croquis → Select solver DoFs
Entornos de trabajo
Atajo de teclado por defecto
Introducido en versión
Ver también


This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).


In the Solver messages box located at the top of the Tasks tab, the following message(s) should be displayed:

  • In case of an under-constrainend sketch:

Under-constrained sketch with X degrees of freedom

where "X" is the number of degrees of freedom remaining in the sketch; you will receive more information if you click on the blue link, or if you use the menu.

  1. The elements which have degrees of freedom are now highlighted in green.
  2. Click anywhere in the sketch to clear the highlight color.
  • In case of a fully-constrainend sketch:

Fully constrained sketch