Sketcher SelectElementsWithDoFs

From FreeCAD Documentation
Jump to navigation Jump to search

This documentation is not finished. Please help and contribute documentation.

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский

Sketcher SelectElementsWithDoFs.svg Sketcher Select solver DoFs

Menu location
Sketch → Sketcher tools → Select solver DoFs
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.18
See also
None


Description

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Usage

In the Solver messages box located at the top of the Tasks tab, the following message(s) should be displayed:

  • In case of an under-constrainend sketch:

Under-constrained sketch with X degrees of freedom

where "X" is the number of degrees of freedom remaining in the sketch; you will receive more information if you click on the blue link, or if you use the menu.

  1. The elements which have degrees of freedom are now highlighted in green.
  2. Click anywhere in the sketch to clear the highlight color.
  • In case of a fully-constrainend sketch:

Fully constrained sketch