Reorientação

From FreeCAD Documentation
This page is a translated version of the page Sketcher ReorientSketch and the translation is 10% complete.
Outdated translations are marked like this.

Sketcher Reorient

Veja também
Part design → Reorient sketch
Bancadas de trabalho
Sketcher, PartDesign
Atalho padrão
Nenhum
Introduzido na versão
-
Veja também
Map sketch, New Sketch

Description

Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).

Usage

  1. Select the sketch to be re-oriented in the tree-view
  2. Choose Sketch → Reorient sketch from the top menu.
  3. A menu will pop up and ask you if you want to detach the sketch from its face
  4. Selecting Yes will give you the same menu as in Sketch → New Sketch.
  5. You can attach the sketch to one of the main planes
  6. You also have the possibility to add a positive or negative offset

Notes

  • When selecting Cancel in the second menu the sketch is simply detached from its face.
  • As long as no sketch is selected, the command is greyed out.