Sketcher: Matrice Dreptunghiulară (de repetabilitate)

From FreeCAD Documentation
This page is a translated version of the page Sketcher RectangularArray and the translation is 27% complete.
Outdated translations are marked like this.
This tool is obsolete, it is not be available in version 0.22 and above. Use Sketcher Translate instead.

Sketcher RectangularArray

Menu location
Sketch → Sketcher tools → Rectangular Array
Workbenches
Sketcher, PartDesign
Default shortcut
None
Introduced in version
0.16
See also
None

Descriere

Creează o matrice de repetabilitate a unor elemente selectate ale schiței.

Utilizare

  1. Selectați elemet(ul)ele sketcher în Tasks-Panel sau Vizualizarea 3D.
  2. Click pe sau selectați Sketch Sketcher tools RectangularArray din meniul principal.
  3. Un meniu contextual vă va întreba asupra diferitelor opțiuni ale suprafeței
  4. Selectați endpoint pentru operația în vizualizarea 3D.



Opțiuni pentru Array

Options

Rectangular array has the following options:

  • Colums: The number of columns for the array.
  • Rows: The number of rows for the array.
  • Equal vertical/horizontal spacing: If the vertical distance between the array elements should be the same as the horizontal distance.
  • Constrain inter-element separation: When this is checked, the distance between the array elements will be constrained.
    If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
  • Clone: If selected, dimensional constraints are replaced by geometric constraints in the copies, so that any change in the original element is also reflected in the copies.