Sketcher NewSketch

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher NewSketch and the translation is 8% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎中文(中国大陆)‎

Sketcher NewSketch.svg Skapa skiss

Menyplacering
Sketch → Skapa skiss
Arbetsbänk(ar)
Sketcher
Standard genväg
Ingen
Introducerad i version
-
Se även
Kartera skiss till ytan ..., Omorientera skiss...

Description

This will create a new sketch.

Note that the Workbench PartDesign.svg PartDesign Workbench has its own new sketch tool, when working on a PartDesign body it is preferable to use that tool.

Usage

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to another already existing face using the Map Sketch - Command.

The sketch can be moved in the 3D view using Placement.