Ponto

From FreeCAD Documentation
This page is a translated version of the page Sketcher CreatePoint and the translation is 10% complete.
Outdated translations are marked like this.

Sketcher Point

Veja também
Sketch → Sketcher geometries → Create point
Bancadas de trabalho
Sketcher
Atalho padrão
Nenhum
Introduzido na versão
-
Veja também
Nenhum

Description

The Point tool creates a point in the current sketch, which can be used for constructing geometry elements.

Point in the sketcher

Usage

  • Click on the Create point button to activate the function.
  • Clicking in the sketch creates a point.
  • Pressing Esc or clicking the right mouse button cancels the function.

Options

  • By default points are created as construction geometry and therefore are not visible outside of Sketch editing mode. Use the Toggle Construction tool to change them to normal geometry.
  • A mode to snap to the grid can be set in the Sketcher Preferences. The point then snaps to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix the point to the grid. It still has two degrees of freedom and can be moved with the mouse or constrained to other locations.