|Sketch → Sketcher constraints → Constrain parallel|
|Introduced in version|
|Constraint Vertical, Constraint Horizontal|
The Constrain Parallel constraint forces two selected straight lines or edges to be parallel to each other.
The sketch contains two randomly oriented lines.
Select both lines by clicking successively on each of them.
Apply the Constrain Parallel constraint by either:
- Pressing the button from the Sketcher constraints toolbarby selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.
- Use the + keyboard shortcut.
- Use the Sketch → Sketcher constraints → Constrain parallel entry from the top menu.
Result: The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.