Sketcher ConstrainHorizontal

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher ConstrainHorizontal and the translation is 25% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎日本語

Esta documentação não está terminada. Por favor ajude e contribua com documentação.

Veja Std ViewScreenShot para um Comando bem documentado. Gui Command dá uma boa explicação dos comandos. Veja List of Commands para outros comandos.


This documentation is not finished. Please help and contribute documentation.

See Std ViewScreenShot/pt for good documented Command. Gui Command gives an overview over commands. And see List of Commands for other commands.

Go to the FreeCAD Wiki to cotribute.

Arrow-left.svg Previous: Constraint Vertical.svg Vertical
Next: Parallel Constraint Parallel.svg Arrow-right.svg

Constraint Horizontal.svg Constraint Horizontal

Localização do menu
Sketch → Sketcher constraints → Constrain horizontally
Workbenches
Sketcher
Atalho padrão
H
Veja também
Constraint Vertical


Descrição

The Horizontal Constraint forces a selected line or lines in the sketch to be parallel to the horizontal axis of the sketch.

Como usar

HorizontalConstraint1.png

Select a line in the sketch by clicking on it.

HorizontalConstraint2.png

The line turns dark green.

HorizontalConstraint3.png

Apply the Horizontal Constraint by clicking on the Horizontal Constraint icon Constraint Horizontal.svg in the Sketcher Constraints toolbar or by selecting the Constrain horizontally menu item in the Sketcher constraints sub menu of the Sketcher menu item in the Sketcher work bench (or the Part Design menu item of the Part Design work bench). The selected line is constrained to be parallel to the horizontal axis of the sketch.

HorizontalConstraint4.png

Multiple lines may be selected,

HorizontalConstraint5.png

and then applying the constraint as described above, they are constrained to be parallel to the sketch horizontal axis.