Sketcher "Ограничение расстояния по горизонтали"

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher ConstrainDistanceX and the translation is 57% complete.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский

Sketcher ConstrainDistanceX.svg Ограничение расстояния по горизонтали

Системное название
Расположение в меню
Sketch → Ограничения эскиза → Ограничение расстояния по горизонтали
Быстрые клавиши
Shift + H
Представлено в версии
См. также
Ограничить расстояние, Ограничение расстояния по вертикали


Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Constraint H Distance.png


  1. Pick one or two points or one line.
  2. Invoke the tool several ways:
    • Press the Sketcher ConstrainDistanceX.svg Constrain horizontal distance button in the toolbar.
    • Use the Shift + H keyboard shortcut. (H is for Horizontal)
    • Use the Sketch → Sketcher constraints → Sketcher ConstrainDistanceX.svg Constrain horizontal distance from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.


Distance from origin:

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Edge, PointOfEdge, App.Units.Quantity('123.0 mm')))

Дистанция между двумя вершинами:

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Edge1, PointOfEdge1, Edge2, PointOfEdge2, App.Units.Quantity('123.0 mm')))

Horizontal span of line (the GUI allows selecting the edge itself, but it is just a shorthand for using the two extremities of the same line):

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Line, 1, Line, 2, App.Units.Quantity('123.0 mm')))

The Sketcher scripting page explains the values which can be used for Edge1, Edge2, Edge, PointOfEdge1, PointOfEdge2, PointOfEdge and Line, and contains further examples on how to create constraints from Python scripts.