Vazba Vzdálenost Horizontálně

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher ConstrainDistanceX and the translation is 7% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский
Arrow-left.svg Previous: Sketcher ConstrainLock.svg Lock

Sketcher ConstrainDistanceX.svg Sketcher ConstrainDistanceX

Umístění Menu
Sketch → Sketcher constraints → Constrain horizontal distance
Pracovní stoly
Výchozí zástupce
Shift + H
Představen ve verzi
Viz také
Constraint Length, Constraint VerticalDistance


Stanoví horizontální vzdálenost mezi 2 body nebo konci přímek. Je-li vybrána pouze 1 položka, je vzdálenost stanovena k počátku.

Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Constraint H Distance.png


  1. Vyberte jeden nebo dva body
  2. Aktivujte vazbu
  1. Pick one or two points or one line.
  2. Invoke the tool several ways:
    • Press the Sketcher ConstrainDistanceX.svg Constrain horizontal distance button in the toolbar.
    • Use the Shift + H keyboard shortcut. (H is for Horizontal)
    • Use the Sketch → Sketcher constraints → Sketcher ConstrainDistanceX.svg Constrain horizontal distance from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.


Distance from origin:

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Edge, PointOfEdge, App.Units.Quantity('123.0 mm')))

Distance between two vertices:

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Edge1, PointOfEdge1, Edge2, PointOfEdge2, App.Units.Quantity('123.0 mm')))

Horizontal span of line (the GUI allows selecting the edge itself, but it is just a shorthand for using the two extremities of the same line):

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Line, 1, Line, 2, App.Units.Quantity('123.0 mm')))

The Sketcher scripting page explains the values which can be used for Edge1, Edge2, Edge, PointOfEdge1, PointOfEdge2, PointOfEdge and Line, and contains further examples on how to create constraints from Python scripts.

Arrow-left.svg Previous: Sketcher ConstrainLock.svg Lock