Szkicownik: Połącz linie

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Sketcher ConnectLines and the translation is 9% complete.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский
This tool is obsolete, it will not be available in future releases (version 1.0 and above).

Sketcher ConnectLines.svg Sketcher ConnectLines

Menu location
Sketch → Sketcher tools → Connect edges
Default shortcut
Introduced in version
See also
Sketcher ConstrainCoincident


Applies Coincident constraints to endpoints with the same coordinates of the selected elements.


  1. Select the unconnected elements in the 3D view or in the Task panel on the left side of the screen
  2. Invoke the command using several methods:
    • Press the Sketcher ConnectLines.svg Connect edges button.
    • Use the Z then J keyboard shortcut.
    • Use the Sketch → Sketcher tools → Sketcher ConnectLines.svg Connect edges entry from the top menu.


Before using this command make sure that obvious constraints (horizontal, vertical, tangential) are already applied to the elements. Selecting the elements in a counter-clock-wise order seems to produce better results.