Sketcher: Copia carbone

From FreeCAD Documentation
This page is a translated version of the page Sketcher CarbonCopy and the translation is 38% complete.
Outdated translations are marked like this.

Copia carbone

Posizione nel menu
Sketch → Geometrie → Copia carbone
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
0.17
Vedere anche
Nessuno

Descrizione

Lo strumento Copia carbone copia tutta la geometria e i vincoli di un altro schizzo nello schizzo attivo.

I vincoli dimensionali che esistono prima della funzione di copia rimangono collegati ai vincoli dimensionali dello schizzo originale attraverso le espressioni.

Utilizzo

  1. Assicurarsi di essere nella modalità di modifica di uno Schizzo.
  2. Premere il pulsante Copia carbone.
  3. Fare clic su un bordo in un altro schizzo.
  4. Gli elementi della geometria ed i vincoli vengono copiati nello schizzo attivo.
  5. Premere Esc o il pulsante destro del mouse per terminare l'operazione.

Notes

  • When sketches are used in the PartDesign Workbench, normally the sketch to carbon copy should be in the same PartDesign Body as the currently active sketch. If the sketch to be copied is not in the active Body, the mouse pointer will not allow selection. In this case, hold Ctrl to allow selection of sketches from other Bodies.
  • Normally, the sketch to select should be in a plane that is parallel to the currently active sketch. If the sketch to be copied is not parallel to the currently active sketch, hold Ctrl+Alt to allow selection of non-parallel sketches. The object will then be adjusted to the active sketch's plane. Noteː as of this writing this needs a save and reload of the document to make it visible. This works for sketches located outside of the currently active Body as well.
  • Since carbon-copied dimensional constraints use expressions they are rendered in a different color. The color can be customized with the Preferences Editor at Edit → Preferences → Sketcher → Colors → Constraint colors → Expression dependent constraint.
  • If the Sketcher mode has been changed to construction mode using Toggle construction geometry all copied geometry will be created in construction mode.

Limitazioni

  • Viene copiato tutto il contenuto dello schizzo; non è possibile selezionare solo una parte di esso.