Schiff TankNeu

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Ship TankNew and the translation is 15% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎română • ‎русский

Ship TankNew.png Schiff TankNeu

Gewichte → Erstelle einen neuen Tank
Eingeführt in Version
Siehe auch


Create a new tank instance in a ship instance.

Tank instances are so far similar to Weight instances (see Weights definition), i.e. they act as weights that shall be considered for the center of gravity and displacement computation. However, they have small differences in the inputs required to setup a tank instance, as well as in the way its contribution to the ship weight is computed. Along this line tanks can only be created on top of solid/volumetric geometries, and the density is not queried until they are added to a load condition (see Load conditions). Afterwards, their contribution to the ship weight and center of gravity will depend on the filling level (to be defined in the load condition) and the ship roll and trim angle, as long as the fluid inside reshapes, effectively affecting the gravity center position (the so-called free-surface effect).


In order to create a weight, select the tank solid geometry (the interior of the tank that will be eventually filled with fluids) and invoke Weights → Create a new tank.

The task panel is shown, where you must select the Ship instance (see Ships creation) in which the tank shall be added.

When the Accept button is pressed, a new tank instance is created inside the chosen Ship instance.