Rocket Vent Hole Size Calculator

Other languages:

English
français
polski

Menu location
Rocket Vent Hole Size Calculator
Rocket → Calculators → Vent Hole Size Calculator
Workbenches
Rocket Workbench
Default shortcut
None
Introduced in version
0.19
See also
None

Description

This calculator determines the minimum size of vent holes for barometric altimeters based on the volume of the space and the number of vent holes.

Calculation comes from the rule of thumb of 1/4" vent hole for every 100 cubic inches of volume. A single vent hole of the appropriate size is susceptible to noise caused by breezes and wind gusts. These effects are minimized by using multiple vent holes distributed around the volume, with 3 holes being considered a practical minimum. The combined area of all vent holes will be equivalent to that of a single larger hole.

Usage

There are several ways to invoke the command:
- Press the Vent Hole Size Calculator button.
- Select the Rocket → Calculators → Vent Hole Size Calculator option from the menu.
Enter the parameters of your electronics bay.

Calculation

Vent hole size is calculated using the following formula:

D_{vent}=0.004396D{\sqrt {\cfrac {L}{N}}}

where

D_{vent}=

vent hole size

D=

body tube diameter

L=

body tube length

N=

number of vent holes

Units

Calculations are done using metric units, but will display in your preferred units. Values can also be entered using any supported units by including the units with the value (eg 5 oz, or 23.2 g)