CAM ToolController

From FreeCAD Documentation
(Redirected from Path ToolController/en)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Description

A tool controller carries properties for how a tool should be used in one or more operations.

For example a tool, like a 1/4 inch cutter can run at many different spindle speeds and feed rates. The same tool might be used in different ways in the same job.

Properties

  • feed speed (h)
  • feed speed (v)
  • rapid speed (h)
  • rapid speed (v)
  • Spindle Speed (rpm)
  • Spindle direction (forward/reverse)
  • Tool Number