Path: ProfileEdges

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Path ProfileEdges and the translation is 33% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română
Arrow-left.svg Previous: Path Profile Face.svg Profile from Face
Next: Pocket Path Pocket.svg Arrow-right.svg

Path Profile Edges.svg Path Profile Edges

Menu location
Path → Edge Profile
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also

Descriere

Instrumentul Path ProfileEdges creează o raiectorie de contur simplă din marginile selectate. Un punct de pornire poate fi activat din editorul de Operațiuni, folosind o locație definită în vizualizarea Property view->Start Points

The Path ProfileEdge object is made to be part of a Path Job.

Path Profile by Edges.png

Utilizare

  1. Select a complete loop of edges
  2. Press the Path-Profile-Edges.png Edge Profile button
  3. Adjust the desired properties


! Path ProfileEdge don't take care of other details of the object. You have to adjust the properties, especially the final depht, carefully, a mistake will destroy your workpeace


Properties

Base Geometry

  • Add, if not allready done, the elements which should be the base for the path
    • you can also delete or change to other elements

Depth

  • DataStart Depth: Starting Depth of Tool- starting depth in Z
  • DataFinal Depth: Final Depth of Tool- lowest cutting level in Z
  • DataStep Down: Step Down of Tool- the amount of material which will be removed at once

Height

  • DataSafe Height: The hight above the workpeace where rapid motions are allowed.
  • DataClearance Height: The height needed to clear clamps and obstructions

Operation

  • DataTool Controller: Defines the Tool controller used in the Operation
  • DataCut Side: Defines on which side the cut should be done
  • DataDirection: Specifies a CW or CCW move for the cut
  • DataExtra Offset: Addet to the tool diameter to leave some material for a finish path
  • DataUse Start Point: Set the start point of the path manualy (not implemented jet)
  • DataUse Compensation: Creates a path with offset of the tool radius to respect the parts dimensions


Arrow-left.svg Previous: Path Profile Face.svg Profile from Face
Next: Pocket Path Pocket.svg Arrow-right.svg