Path: Profile

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Path Profile and the translation is 19% complete.
Outdated translations are marked like this.
Other languages:
English • ‎français • ‎italiano • ‎română • ‎русский
Arrow-left.svg Previous: Path Engrave.svg Engrave
Next: Helix Path Helix.svg Arrow-right.svg

Descriere

Instrumentul Contur creează o simplă tăiere a conturului exterior al obiectelor 3D complexe Part. Întregul model de lucru servește ca intrare la Operație, indiferent dacă geometria corpului este selectată atunci când este apelată comanda Contour. Un punct de pornire poate fi activat din editorul de operațiuni, utilizând o locație definită în Property view->Start Points.

Path profile example.jpg

Utilizare

  1. Select a face on a Part-based object. Alternatively, also select a starting edge on that face.
  2. Press the Path Profile.png Profile button
  3. Adjust the desired properties

Opţiuni

  • Obiectul Profilului de Traiectorie este creat ca făcând parte dintr-o operație Path Job. Pentru a configura corect profilul, trebuie să existe o magazie de scule în obiectul mașinii proiectului și o comandă Tool Change trebuie plasat înaintea profilului.

Proprietăți

Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.

Base

Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.

  • DataPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
    • DataAngle: Angle in degrees applied to rotation of the object around Axis property value
    • DataAxis: Axis(one or multiple) around which to rotate the object, set in sub-properties: x, y, z
      • DataX: x axis value
      • DataY: y axis value
      • DataZ: z axis value
    • DataPosition: Position of the object, set in sub-properties: x, y, z - with respect to the origin (or origin of parent object container)
      • DataX: x distance value
      • DataY: y distance value
      • DataZ: z distance value
  • DataLabel: User-provided name of the object (UTF-8)

Depth

  • DataClearance Height: The height needed to clear clamps and obstructions
  • DataFinal Depth: Final Depth of Tool- lowest value in Z
  • DataSafe Height: The above which Rapid motions are allowed.
  • DataStart Depth: Starting Depth of Tool- first cut depth in Z
  • DataStep Down: Incremental Step Down of Tool

Path

  • DataActive: make False, to prevent operation from generating code
  • DataComment: An optional comment for this Operation
  • DataUser Label: User assigned label
  • DataTool Controller: Defines the Tool controller used in the Operation

Profile Properties

  • Data Side: Partea marginii care urmează a fi tăiată
  • Data Direction: Directia ca traiectoria sculei ar trebui sa ia in jurul materialului, orara sau antiorar, ClockWise CW sau CounterClockWise CCW
  • Data RollRadius: Raza de început și de sfârșit
  • Data OffsetExtra: valoare suplimentară pentru a rămâne în afara profilului final - pentru a asigura o traiectorie laterală a sculei
  • Data SegLen: Valoarea (mozaicarea poligoanelor de discretizare)/tessellation pentru valorile căilor de unelte realizate din curbele bezzier, b-splinestele și elipsele

Rotation

  • DataAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
  • DataB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).
  • DataEnable Rotation: Enable rotation to gain access to pockets or areas not normal to Z axis.
  • DataInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
  • DataReverse Direction: Reverse orientation of Operation by 180 degrees.

Start Point Properties

  • DataStart Point: The start point of this path
  • DataUse Start Point: make True, if specifying a Start Point
  • DataExtend At Start: extra length of tool path before start of part edge
  • DataLeadIn Line Len: length of straight segment of toolpath that comes in at angle to first part edge

End Point Properties

  • DataUse End Point: make True, if specifying an End Point
  • DataExtend At End: extra length of tool path after end of part edge
  • DataLeadOut LineLen: length of straight segment of toolpath that comes in at angle to last part edge
  • DataEnd Point: The end point of this path


Extras, Not-in-use, or Degraded

  • DataUse Placements: make True, if using the profile operation placement properties to transform toolpath in post processor
  • DataSegLen: Tesselation value for tool paths made from beziers, bsplines, and ellipses

Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above. This section is simply a layout map of the settings in the window editor for the Operation.

Base Geometry

  • Add: adds selected element(s) which should be the base(s) for the path(s)
  • Delete: delete the selected item(s) in the Base Geometry list
  • Clear: clear all items in the Base Geometry list

Depth

  • DataStart Depth
  • DataFinal Depth
  • DataStep Down

Height

  • DataSafe Height
  • DataClearance Height

Operation

  • DataTool Controller
  • DataCut Side
  • DataDirection
  • DataExtra Offset
  • DataUse Start Point
  • DataUse Compensation
  • DataProcess Holes
  • DataProcess Circles
  • DataProcess Perimeter
Arrow-left.svg Previous: Path Engrave.svg Engrave
Next: Helix Path Helix.svg Arrow-right.svg