Attiva operazione

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Path OpActive and the translation is 12% complete.
Other languages:
English • ‎français • ‎italiano

Questa documentazione non è completa. Si prega dare un aiuto e contribuire alla documentazione.

Vedere Draft ShapeString per avere un esempio di comando ben documentato. Comandi della Gui fornisce una panoramica sui comandi. Vedere Lista dei comandi per gli altri comandi.

Per contribuire consultare la pagina Contribuire.


Path OpActive.svg Path OpActive

Menu location
Path → Toggle the Active State of the Operation
Workbenches
Path
Default shortcut
P X
Introduced in version
-
See also
Path Workbench


Descrizione

The Path OpActive.svg Active tool in the Workbench Path.svg Path Workbench is used to toggle the active state of an existing path operation. This tool is not available, indicated as a light gray version of the icon, until you have created one or more path operations. Once your Path Job.svg Job has at least one path operation the icon will be fully colored indicating it is available for use.


Usage

Deactivate an active operation

  1. Select an operation in the "Operations" group within a Job.
  2. Click on the Path OpActive.svg Active toggle icon.
  3. When you deactivate an operation, you will notice:
    • The operation title and the icon preceding it will turn light gray.
    • The icon in front of the operation's label will be replaced with that of the Path OpActive.svg OpActive's icon.
    • The paths generated from the operation will disappear from the viewport.
    • When using the Path Inspect.svg Inspect G-code tool or Path PostProcess.svg Post Process command, no g-code will be provided from the deactivated operation.

Activate a deactivated operation

  1. Select a deactivated operation (light gray text and icon) in the "Operations" group within a Job.
  2. Click on the Path OpActive.svg Active toggle icon.
  3. When you activate an operation, you will notice:
    • The operation title and the icon preceding it will turn colorful.
    • The icon in front of the operation's label will be replaced with that which corresponds to the operation.
    • The paths generated from the operation will be recomputed and displayed in the viewport.
    • When using the Path Inspect.svg Inspect G-code tool or Path PostProcess.svg Post Process command, the operation's g-code will be provided.

Options

Empty

Properties

Data

Empty

View

Empty

Scripting

See also: FreeCAD Scripting Basics.

Example:

#Place code example here.