Path: Punct de Fixare

From FreeCAD Documentation
(Redirected from Path Fixture/ro)
This page is a translated version of the page CAM Fixture and the translation is 27% complete.
Outdated translations are marked like this.

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Path Fixture

poziția meniului
Path → Partial Commands → Fixture
Ateliere
Path
scurtătură
P F
Prezentat în versiune
-
A se vedea, de asemenea,
nici unul

Descriere

Acest instrument stabilește dispozitivul de decalare a lucrării de la controlerul CNC al mașinii.

Target Work Offset Coordinates în mod tipic incude: Fixtures G53 to G59. Codul G-Code este simplu Fixture (G53, G54, etc...). Coordinatele offset fixtures reprezintă:

  • G53 -> Sistemul de coordonate al mașinii.
  • G54 -> Scratchpad coordinate system.
  • G55 to G59.9 -> Sistemele de coordonate care să permită compensările de lucru, legate de comutatoarele Homing localizate pe mașina CNC, să fie utilizate.

Fixarea G59 este utilizată pentru a extinde dispozitivele disponibile. Gradul de extindere implementat este specific mașinii CNC, iar această comandă permite prevederea pentru G59.1 până la G59.9.

Utilizare

  1. Apăsați butonul Fixture
  2. Selectați Work Offset Fixture dorit din meniul contextual/drop-menu.

Proprietăți

  • DateFixture: Setați punctul curent de fixare
  • DateActive: Definește dacă comanda este activă sau nu când este inserată într-un compound

Notes

Limitations

Scripting