Fixtura de trayectoria

From FreeCAD Documentation
(Redirected from Path Fixture/es)
This page is a translated version of the page CAM Fixture and the translation is 33% complete.
Outdated translations are marked like this.

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Fixtura de trayectoria

Ubicación en el Menú
Trayectoria → Comandos Parciales → Fixtura
Entornos de trabajo
Trayectoria
Atajo de teclado por defecto
P F
Introducido en versión
-
Ver también
Ninguno

Descripción

Esta herramienta coloca un punto de fixtura (G53-G59) para las siguientes operaciones

Target Work Offset Coordinates typically include: Fixtures G53 to G59. The G-code is simply the Fixture (G53, G54, etc...). The coordinate offset fixtures represent:

  • G53 → Machine coordinate system.
  • G54 → Scratchpad coordinate system.
  • G55 to G59.9 → Coordinate fixtures allowing work offsets, relative to Homing switches located on the CNC machine, to be used.

The G59 Fixture is used to expand available fixtures. The degree of expansion implemented is CNC machine specific, and this command allows provides for G59.1 to G59.9.

Utilización

  1. Presiona el boton Fixtura
  2. Coloca la fixtura deseada

Propiedades

  • DatosFixtura: Coloca el actual punto como fixtura
  • DatosActivar: Define si este comando esta activo o no cuando es introducido a un compuesto.

Notes

Limitations

Scripting