# Part: Plane

This page is a translated version of the page Part Plane and the translation is 6% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎čeština • ‎русский

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Previous: Primitives
Next: Ellipsoid

Part CreatePrimitives

PartCreate Primitives → Plane
Workbenches
Default shortcut
None
Introduced in version
-
Create Primitives

## Descriere

Create a simple parametric plane 10 x 10 mm, with the parameters of position, length, and width. By default, the plane is positioned at the origin (0,0,0).

## Cum se utilizează

The standard plane is created with its lower left corner at the origin point 0,0,0. To change these parameters, open the Location section and enter the desired values ​​in the respective input fields, or click on the 3D view and select a point, the point coordinates are taken from the fields. In the Direction menu you can also define a standard vector (X, Y or Z) normal to the plane, or click User Defined ... to open the dialog box that allows you to set a different carrier (eg direction 1.0 , -1 creates a plane inclined 45 ° with respect to X and Z).

The standard plane is created with its lower left corner at the origin point `0,0,0`. To change these parameters, open the Location section and enter the desired values ​​in the respective input fields, or click on the 3D view and select a point, the point coordinates are taken from the fields. In the Direction menu you can also define a standard vector (X, Y or Z) normal to the plane, or click User Defined ... to open the dialog box that allows you to set a different carrier (eg. direction 1.0 , -1 creates a plane inclined 45° with respect to X and Z).

The properties can be changed later in the Combined View → Data, after selecting the item.

## Properties

### Data

Base

• DateLabel : String name of the object, defaults to 'Plane'. User may rename it.
• DatePlacement: Placement of feature is defined by below angle, axis and position.
• DateAngle : Angle of rotation relative to the below axis.
• DateAxis : Defines the axis of rotation plane: X, Y, or Z. Defaults to Z axis, Z = 1
• DatePosition : Position X, Y, Z, relative to the origin 0, 0, 0.

Plane

• DateLength : Length is the dimension along the X axis The default value is 10 mm
• DateWidth : Width is the size of the Y-axis The default value is 10 mm

### View

You have the standard properties view.

Previous: Primitives
Next: Ellipsoid