3D cмещение

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Part Offset and the translation is 37% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎čeština • ‎русский

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Part Offset.svg Смещение 3D

Системное название
Part_Offset
Расположение в меню
Деталь → Смещение 3D
Верстаки
Верстак Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Толщина

Описание

The Part 3D Offset tool creates parallel copies of a selected shape at a certain distance from the base shape, giving a new object.

PartOffset0.pngPartOffset1.png

Применение

  1. Select the Object you want to create the offset from.
  2. Press the Part Offset.svg 3D Offset button
  3. Adjust distance and parameters depending on the original object and the resulting objects validity.

Свойства

  • ДанныеOffset: Distance to offset the faces of the shape
  • ДанныеMode: Mode of creation . Skin creates a new shape around the source shape. Pipe ( todo ) . RectoVerso ( todo )
  • ДанныеJoin type: How the new corners are build up. Intersection gives sharp corners by linear extension of the edges. Arc and Tangent give rounded corners.
  1. Option ː Intersection ː Allows offsets pointing inwards to "overflood" the gap by intersecting the resulting shape until opposite faces are reached.
  2. Option ː Self Intersection ː ( todo )
  3. Option ː Fill Offset ː When the shape was 2 dimensional , the gap inbetween the 2 shapes gets filled. The fill is now a solid, hence the source shape is not a solid . Thus boolean operations may lead to strange results. (see example below) .

Пример

Object with small offset and rounded ( arc ) corners.

PartOffset0.pngPartOffset1.png


Same object with sharp ( intersection ) corners.

PartOffset3.png


Same object with thick distance overfilling the front left gap and allowed intersections.

PartOffset2.png


Arbitrary shape ( draft poly as wire ) with a 3D Offset ( ignores MODE param )

PartOffset4.png


same shape with a 3D Offset as SKIN and filled offset

PartOffset5.png


filled offset with 2 Cylinders creating boolean cuts. Cylinder A goes through the FILL whilst Cylinder B only goes thru the FILL and NOT through the source 2D shape.

PartOffset6.png