Díl Zrcadlení

From FreeCAD Documentation
This page is a translated version of the page Part Mirror and the translation is 15% complete.
Outdated translations are marked like this.

Díl Zrcadlení

Umístění Menu
Díl -> Zrcadlení
Pracovní stoly
Díl, Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Nikdo

Description

Úvod

'Zrcadlit objekt' - Tento nástroj vytváří nový objekt, který je odrazem (obrazem) původního objektu (zdroje). Obraz objektu je vytvořen za rovinou zrcadlení. Rovina zrcadlení může být standardní rovina (XY, YZ, or XZ) nebo jakákoliv rovina paralení ke standardní rovině.

Příklad:

Before

After mirrored through YZ plane

Použití

Ze seznamu vyberte zdrojový objekt. Vyberte standardní Mirror plane z rozbalovacího seznamu.

When the select button label says Selecting you are in reference selection mode and there is a selection gate in effect, which disallows the selection of unsupported reference objects. Click the button to toggle the selection gate off, the button label then changes to Select reference.

The mirror plane is defined by a ÚdajeNormal (direction) and a ÚdajeBase (position). When the ÚdajeMirror Plane property contains a reference object these properties are made read-only as they are then computed based on that object. The plane is infinite even if the reference object is not.

A reference object can be a planar face, such as the face of a Part Box, a circular edge, a Datum Plane, an origin plane of a Std Part container, or any object with a single planar face or single circular edge. There is also support for Links. Note, however, that B-spline surfaces, such as ruled surfaces or loft faces are not supported.

Options

Volby

Políčka Základní bod mohou být použity pro posunutí roviny zrcadlení vzhledem ke standardní rovině zdrcadlení. Pouze jedno z políček X, Y, nebo Z je platné pro danou standardní rovinu.

Standardní rovina Základní políčko Vliv
XY Z Posune rovinu zrcadlení podle osy Z.
XY X, Y Žádný vliv.
XZ Y Posune rovinu zrcadlení podle osy Y.
XZ X, Z Žádný vliv.
YZ X Posune rovinu zrcadlení podle osy X.
YZ Y, Z Žádný vliv.

Notes

Omezení

  • Jiné roviny zrcadlení (např. to co nejsou paralelní se standardními rovinami) nejsou podporovány (k verzi FC 0.13).