Измерить длину

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Part Measure Linear and the translation is 29% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎português do Brasil • ‎română • ‎русский

Part Measure Linear.svg Part Measure Linear

Системное название
Part Measure Linear
Расположение в меню
Measure → Измерить длину
Верстаки
Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет


Description

This tool measures the distance between two selected topology elements (vertex, edge, face) and displays the measurement in the 3D view. The shortest distance between the two elements is shown in red, and delta measurements (distances parallel to standard X, Y, Z axes) are shown in green.

MeasureLinear3D1.png MeasureLinearDelta1.PNG

Применение

  1. Select any combination of two elements: vertices, edges, faces
  2. There are several ways to invoke the command:
    • Press the Part Measure Linear.svg Measure Linear button.
    • Use the Measure → Measure Linear entry in the top menu
  3. Alternatively the command can be launched without prior selection. A selection dialog then opens in the Task panel. A Control widget also provides buttons to reset the selection, toggle the measurement display in the 3D view, and clear all measurements.
  4. Measurements are automatically discarded when closing the document.