Díl Elipsa

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Part Ellipse and the translation is 14% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎română • ‎čeština • ‎русский

This documentation is not finished. Please help and contribute documentation.

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Part Ellipse.svg Díl Elipsa

Umístění Menu
Díl → Vytváření zákl.geom.tvarů → Elipsa
Pracovní stoly
Díl, OpenSCAD
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
..


Základní geometrické tvary

PartEllipsePrimitivesOptions it.png

Elipsa

Parametr

  • Velký poloměr
  • Malý poloměr
  • Úhel 1
  • Úhel 2

Umístění

This command will create a elliptical curved edge. With the default values, the elliptical curved edge will be closed and therefore will be an ellipse. If the properties Angle 1 or Angle 2 are changed from their default values (0 and 360) the edge will be an open curve.

Usage

The Create Primitives dialogue can be accessed via the CreatePrimitives icon Part CreatePrimitives.svg located in the Part menu or the Part toolbar, in the Part Workbench.


Properties

  • Major radius: the major radius of the ellipse, the default value is 4
  • Minor radius: the minor radius of the ellipse, the default value is 2
  • Angle 1: start of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 2: end of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 360