Part CrossSections

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Part CrossSections and the translation is 14% complete.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎română • ‎русский
Arrow-left.svg Previous: Part Section.svg Section

Part SectionCross.png Поперечные сечения

Расположение в меню
Деталь → Поперечные сечения
Быстрые клавиши
Представлено в версии
См. также


The Cross-sections utility creates one or more cross-sections through the selected shape.


  1. Select a shape.
  2. Press the Part CrossSections.svg Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.


  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.


Select an object

Dialog window


Arrow-left.svg Previous: Part Section.svg Section