Díl Kružnice

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Part Circle and the translation is 11% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎čeština • ‎русский

Part Circle.svg Díl Kružnice

Umístění Menu
Díl → Vytváření zákl.geom.tvarů → Kružnice
Pracovní stoly
Díl, OpenSCAD
Výchozí zástupce
Představen ve verzi
Viz také


This command will create a circular curved edge. With the default values, the circular curved edge will be closed and therefore will be a circle. If the properties Angle 0 or Angle 1 are changed from their default values (0 and 360) the edge will be an open curve, an arc.

Alternatively a Part Circle can be initially defined from three points. Once created the circle will only contain the standard Part Circle properties and will no longer contain a reference to the creation points.


A Circle geometric primitive is available from the Create Primitives dialogue in the Part workbench.

  1. Switch to the Workbench Part.svg Part Workbench
  2. There are several ways to access the Create Primitives dialogue:

Základní geometrické tvary

PartCirclePrimitivesOptions it.png



  • Poloměr:
  • Úhel 1:
  • Úhel 2:
  • Ze tří bodů:


  • Radius: the radius of the curved edge (arc or circle)
  • Angle 0: start of the curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 1: end of the curved edge, (degrees anti-clockwise), the default value is 360