Verificar geometria

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Part CheckGeometry and the translation is 6% complete.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский
Arrow-left.svg Previous: Part RefineShape.svg RefineShape

Part CheckGeometry.svg Part CheckGeometry‏‎

Menu location
Part → Check geometry
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
None

Description

The Part CheckGeometry.svg Part CheckGeometry tool runs a verification and reports if geometry is a valid solid. The tool checks if the Boundary representation (BRep or B-rep) of the model is valid.

Usage

  1. Select a part (beware to select the whole part and not just a face to check for valid solid)
  2. Invoke the tool by either:
    • Clicking on the Part CheckGeometry.svg CheckGeometry button available in the Part workbench toolbar.
    • Using the Part → Part CheckGeometry.svg Check geometry entry from the top menu.
  3. The Settings task panel opens, unless Skip settings page is enabled. See Options for more information. Click Run check.

Results will be reported in the Task panel. If the check produced errors: click in the report on a specific error message and the corresponding geometric object (edge, face, etc.) will be highlighted in the 3D view.

Note: FreeCAD has no automatic repair methods for solids, so you need to look at the steps involved to model this specific geometry and try to fix the error on your own.

Options

Skip settings page

If ticked, subsequent invocations of the tool skip showing the Settings task panel.

Run BOP check

If ticked, additionally a Boolean OPerations (BOP) check is performed. introduced in version 0.19

Log errors

If ticked, any errors found are also logged in the report view. introduced in version 0.19


Arrow-left.svg Previous: Part RefineShape.svg RefineShape