Díl Box

From FreeCAD Documentation
This page is a translated version of the page Part Box and the translation is 4% complete.
Outdated translations are marked like this.

Part Box

Umístění Menu
Part → Box
Pracovní stoly
Part, Complete
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Part CreatePrimitives

Description

The Part Box command creates a parametric box solid, a rectangular cuboid. In the coordinate system defined by its ÚdajePlacement property, the bottom face of the box lies on the XY plane with its front left corner at the origin, and its front edge parallel to the X axis.

Usage

V datové záložce boxu mohou být později upravovány vlastnosti objektu:

Example

Part Box from the scripting example

A Part Box object created with the scripting example below is shown here.

Notes

  • A Part Box can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.

Properties

See also: Property editor.

A Part Box object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Box

  • ÚdajeLength (Length): The length of the box. This is the dimension in its X direction. The default is 10mm.
  • ÚdajeWidth (Length): The width of the box. This is the dimension in its Y direction. The default is 10mm.
  • ÚdajeHeight (Length): The height of the box. This is dimension in its Z direction. The default is 10mm.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Box can be created with the addObject() method of the document:

box = FreeCAD.ActiveDocument.addObject("Part::Box", "myBox")
  • Where "myBox" is the name for the object.
  • The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

box = doc.addObject("Part::Box", "myBox")
box.Length = 4
box.Width = 8
box.Height = 12
box.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(75, 60, 30))

doc.recompute()