Tutorialul PartDesign

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign tutorial and the translation is 67% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎русский

Base ExampleCommandModel.png Tutorial

Topic
Sketcher
Level
Beginner
Time to complete
15 minutes
Author
Drei
FreeCAD version
0.16 or above
Example File(s)



Introducere

Acest tutorial are rolul de a introduce cititorul în fluxul de lucru de bază al aplicației PartDesign Workbench. Cititorul va vedea cum se creează obiecte 3D bazate pe schițe, operații substractive și replicarea unor caracteristici specifice într-un model.

Sketcher tutorial result.png

Cerințe

Procedură

Crearea de forma geometrice 3D

Scopul Atelierului PartDesign Workbench este de a permite utilizatorului să creeze geometrie în spațiul 3D. Ca atare, este echipat cu instrumente pentru a face uz de schițe și a le converti în obiecte 3D.

Pentru a realiza acest lucru, există două instrumente:PartDesign Pad.png Pad and PartDesign Revolution.png Revolution. Alongside their subtractive counterparts (PartDesign Pocket.png Pocket and PartDesign Groove.png Groove) they make up most of the common actions used by this workbench.

  1. Switch to the PartDesign Workbench
  2. Select the sketch that was created in the Sketcher tutorial
  3. Select PartDesign Pad.png Pad
  4. Set the distance to 5 mm
  5. Select Ok

Another way to create 3D geometry is with the PartDesign Revolution.png Revolution tool.

PartDesign revolution exercise.png

  1. Create a sketch based on the image above
  2. Select PartDesign Revolution.png Revolution
  3. Set the "Axis" to the "Horizontal Sketch Axis"
  4. Set the angle to 360°

Caracteristici Subtractve

Vom începe prin a crea o schiță cu forma pe care dorim să o extragem.

  1. Select the top flat face of the "Revolution"
  2. Select Sketcher NewSketch.png New sketch
  3. Select Sketcher External.png External Geometry
  4. Approach the edge of the pad. An arc should be highlighted
  5. Select the arc. An arc of a different color should appear in the sketch
  6. Create a hexagon centered on the same point as the arc and set the radius of the reference circle to 5 mm
External Geometry

Când a fost creat un element 3D, este posibil să creați referințe la acesta într-o schiță.

  1. Select Sketcher External.png External Geometry.
  2. Approach the element that you wish to reference, the edge of a Pad for example.
  3. Click on it
  4. New elements of a different color should appear on the sketch in the location of the feature you wish to reference.

PartDesign pocket exercise.png

Apoi, vom continua să aplicăm funcționalitateaPocket.

  1. Select the sketch
  2. Select PartDesign Pocket.png Pocket
  3. Set the distance to Through all

Funcționalități ale Modeluluis

Re apelați profilul extrudat care a fost creat la începutul tutorialului.

  1. Select the top face of the object
  2. Create a new Sketch
  3. Create reference geometry linked to the top arm of the figure
  4. Create a circle constrained to the center of the reference arc
  5. Set its radius to 3 mm
  6. Pocket the sketch through all the workpiece

Instead of creating a circle for each hole in the sketch, we will introduce the concept of Pattern Features. These tools operate by replicating a feature in the workpiece that has already been created and that we wish to reproduce in a linear or circular arrangement. We will use a combination of Linear and Polar pattern features simulatneously to obtain the final workpiece.

  1. Select the Pockt feature that we just created in the Tree View
  2. Select PartDesign MultiTransform.png MultiTransform

In the Combo View we are now asked to introduce the Transformations that we desire. Notice that in the MultiTransform parameters menu we see that FreeCAD has identified the Pocket as the Original feature and a second box requests us to Right click it to introduce the pattern features.

  1. Right click the box
  2. Select Add Linear Pattern
  3. Set the Direction to Vertical Sketch Axis
  4. Set length to 10 mm
  5. Leave occurrences at 2
  6. Click OK
  7. Right click the box again to add a Polar Pattern. Notice that the 3D view has now added the linear pattern.
  8. Set occurrences to 5
  9. Click OK twice

După finalizarea acestei sarcini, trebuie să aveți următorul rezultat.

PartDesign multitransform exercise.png

If not, re-edit the MultiTransform operation by double clicking on it in the Tree View. Check both pattern features to detect necessary modifications, such as the Axis and if the Direction needs to be reversed.

Suntem terminați acum cu fluxul de lucru de bază pentru PartDesign Workbench.