Here the project plan for the PartDesign as part of the Development roadmap.
Purpose and principles
This is a software development project aimed to implement a Part Design capabilities. Its about implementing some core features into the CAD modules of FreeCAD, Part, PartDesign and Assembly.
The development steps are planned here and tracked in the Issue tracking system to get a well formed change log: Issue tracker
Aim of the project is to enable FreeCAD accomplish a design task like the one at the right.
This will be achieved by using the Sketcher and the PartDesign workbench to design a special part and Part to load a standard part as STEP (like the linear bearing). The Assembly puts it all together with constraints.
Also an important outcome is the Feature editing methodology. Which gives the user an intuitive approach to instantiating and editing features. This is important for all other Modules and Workbenches to become, to comply to a consistent user interface!
A parametric sketcher with a geometrical constraints solver, for more details see the Sketcher project.
Since a history based modelling can have a lot of steps leading to the final shape a bracket is needed. That's the body, which holds the final outcome of the modelling and acts as a group to all the features of the history tree.
A Pad feature extrude a Sketch (or any Part2DObject) in its normal direction. Always guaranty a solid, or fail.
Imprint a sketch in a base solid either defined by depth or "Up to last | Up to first". Also guaranty a solid.
A Very good bore parameter definition from the NaroCad specification:
Replicate one of the above features
Replicate one of the above features along an x,y pattern
Replicate one of the above features along a pattern in polar coordinates
Replicate one of the above features according to a general rule provided in form of a script.
What others do
The Pattern feature class can be implemented as a tabular pattern and serve as a base class for the Rectangular, Circular and Scripted Pattern features. These derived classes will only have to fill in the repetitions table of the base class.
Each line of the repetitions table of the base Pattern class has to hold at least a transformation matrix to applied to the Placement of the original feature to be replicated. Additionally we could have optional transformation rules like for example manipulating some parameter value the feature to be replicated (e.g. in order to create a pattern of holes with varying radius).
Modeling objects hierarchy
This UML chart shows the planed object hierarchy and its relationships. Yellow is a abstract base class, blue implemented and grey is planed.
Next actions are defined in the Roadmap entry for PartDesign:
Since the parametric/associative nature of the PartDesign we need finally a "Body" which groups and organizes a construction history. The Body itself holds the end result as a shape and has grouped as children the PartDesign features. It also defines the actual head of the modeling history. Its also related to the Assembly project since its the building block for products and compounds.
The Pad and Pocket features are the first teaser for the PartDesign. There is still work to do especially the visibility control and the visual manipulators. But then additional features are needed.
Pattern feature which repeatingly apply a Pad or Pocket feature according to a circular or rectangular patter. An Example in IronCAD. Done [jrheinlaender]
Classical bore hole with all parameters for threading and counter bore...
Sweeps a Sketch along a curve and create a Solid.
Rotate a Sketch along one of its Axis and a certain angle. Done [jrheinlaender et al.]
- Fillet/Chamfer Part
- Apply fillet/chamfer operation to different selection types (face/faces pair/whole body)*
- Pad Tool
- Create 'up to next' mode DONE [mrlukeparry]
- Create 'up to surface/face' mode [mrlukeparry]
- Create draft property for pad DONE [mrlukeparry]
- If pad is selected on face automatically create a sketch?
- Create 'midplane' mode DONE [jrheinlaender]
- Pocket Tool
- Create 'up to first', 'up to last', 'through all', 'up to surface/face' modes DONE [jrheinlaender]
- If pocket is selected on face automatically create a sketch?
- Revolution Part
- Allow a generic line segment/axis to be used for reference
- Create 'midplane' mode DONE [jrheinlaender]
- Hole Feature Create ISO presentation of threads according to ISO 6410–1 standard in partial thread
- Pattern Feature DONE [jrheinlaender]
- Sweep Feature
- Body Feature
- Reference Geometry
- Mirror Tool DONE [jrheinlaender]
- Copy feature Tool