PartDesign: Loft sottrattivo

From FreeCAD Documentation
This page is a translated version of the page PartDesign SubtractiveLoft and the translation is 37% complete.
Outdated translations are marked like this.

Loft sottrattivo

Posizione nel menu
Part Design → Loft sottrattivo
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
0.17
Vedere anche
Loft additivo, Sweep sottrattivo

Descrizione

Loft sottrattivo crea un solido sottrattivo nel corpo attivo eseguendo una transizione tra due o più schizzi (indicati anche come sezioni trasversali). La sua forma viene quindi sottratta dal solido esistente.

Utilizzo

Dialog-based workflow

  1. Press the Subtractive loft button.
  2. In the Select feature dialog, select a sketch to be used as base profile object and click OK.
    • Alternatively, either a single sketch or the face of a 3D object (introduced in version 0.20) can be selected prior to pressing the subtractive loft button.
  3. In the Loft parameters, press the Add Section button.
  4. Select the next sketch in the 3D view. Repeat to select more sketches in the order you want them to be lofted through. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.
  5. Set options if needed and click OK.

Selection-based workflow

  1. Select several sketches. It is hereby important in what order you select them:
    • The sketch selected at first will become the base profile object in the next step
    • The sketches selected after the first one will become the loft sections. Also here the selection order is important: The sketch selected as second will become the first loft section, the one selected as third becomes the second section and so on. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.
    • The first or last selection can also be a face of a 3D object (introduced in version 0.20)
  2. Press the Subtractive loft button.
  3. Set options if needed and click OK.

Opzioni

  • Ruled surface: effettua transizioni diritte tra le sezioni trasversali. Non si applica a un loft con due sezioni trasversali. Se non viene selezionato, le transizioni sono fluide.
  • Closed: effettua una transizione dall'ultima sezione trasversale alla prima, creando un loop.
  • Premere il pulsante Rimuovi sezione per rimuovere uno schizzo, selezionandolo nella vista 3D.

Proprietà

  • DatiLabel: nome dato all'operazione, questo nome può essere cambiato a piacere.
  • DatiSections: elenca le sezioni utilizzate.
  • DatiRuled: vedere Opzioni.
  • DatiClosed: vedere Opzioni.
  • DatiMidplane: N/A
  • DatiReversed: N/A
  • DatiRefine: vero o falso. Se impostato su true, pulisce il solido dai bordi residui lasciati dalle operazioni. Per maggiori dettagli vedere Affina forma.

Notes

  • Gli schizzi devono formare profili chiusi.
  • Non è possibile eseguire il loft su un vertice.
  • Una sezione trasversale non può giacere sullo stesso piano di quella immediatamente precedente.
  • Per controllare meglio la forma del loft, è consigliabile che tutte le sezioni abbiano lo stesso numero di segmenti. Ad esempio, per un loft tra un rettangolo e un cerchio, il cerchio può essere suddiviso in 4 archi collegati.

Link