PartDesign "Субтрактивная спираль"

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign SubtractiveHelix and the translation is 26% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎русский

PartDesign SubtractiveHelix.svg Субтрактивная спираль

Системное название
PartDesign_SubtractiveHelix
Расположение в меню
PartDesign → Create a subtractive feature → Субтрактивная спираль
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.19
См. также
Аддитивная спираль

Описание

The SubtractiveHelix tool modifies a solid by sweeping a selected sketch or 2D object along a helix path cutting away the material.

PartDesign SubtractiveHelix example overview.png

The profile (B), is swept around axis (A) in order to produce the helical groove (C) in the pre-existing work piece

Применение

  1. Select the sketch to be swept into a helix. A face on the existing solid can alternatively be used.
  2. Press the PartDesign SubtractiveHelix.svg PartDesign SubtractiveHelix button.
  3. Set the Helix parameters (see next section).
  4. Inspect the Helix in the view window, to ensure that the parameters do not result in a self intersecting helix.
  5. Press OK.

Опции

When creating a SubtractiveHelix, the Helix parameters dialogue offers several parameters specifying how the sketch should be swept.

PartDesign SubtractiveHelix taskpanel.png

Axis

This option specifies the axis about which the sketch is to be swept.

  • Normal sketch axis: selects the normal of the sketch that runs through the sketch origin as axis. introduced in version 0.20
  • Vertical sketch axis: selects the vertical sketch axis.
  • Horizontal sketch axis: selects the horizontal sketch axis.
  • Construction line: selects a construction line contained in the sketch used by the Helix. The drop down list will contain an entry for each construction line. The first construction line created in the sketch will be labelled Construction line 1.
  • Base (X/Y/Z) axis: selects the X, Y or Z axis of the Body's Origin;
  • Select reference...: allows selection in the 3D view of an edge on the Body, or a datum line.

Mode

This controls what parameters will be used to define the helix. The choices are:

  • Pitch-Height-Angle: definition via the height per turn and the overall height
  • Pitch-Turns-Angle: definition via the height per turn and the number of turns
  • Height-Turns-Angle: definition via the overall height and the number of turns
  • Height-Turns-Growth introduced in version 0.20: definition via the overall height, the number of turns and the growth of the helical radius. So a Height of zero leads to a path in form of a spiral. A Height and Growth of zero to leads to a path in form of a circle.

Шаг

Расстояние между двумя витками спирали.

Height

The height of the helix (center-center).

Turns

The number of turns in the helix. Define as Height/Pitch

Cone Angle

Angle of the cone that forms a hull around the helix. Allowable range: [-89°, +89°].

Left handed

If checked, the turning direction of helix is reversed from default clockwise to counterclockwise.

Reversed

If checked, the axis direction of helix is reversed from default.

Remove outside of profile

If checked, the result will be the intersection of the swept profile and the preexisting body.

Update view

If checked, the helix will be shown in the view, and updated automatically on every change of the parameters.

Preferences

  • A subtractive helix that does not intersect the body will be visible in the preview if Tools → Edit parameters... → BaseApp → Preferences → Mod → PartDesign → SubtractiveHelixPreview is set to true. The default for this preference is true. introduced in version 0.20

Свойства

  • ДанныеPitch: The axial distance between two turns.
  • ДанныеHeight: The total length of the helix (not accounting for the extent of the profile)
  • ДанныеTurns: The number of turns (does not need to be a whole number)
  • ДанныеLeft Handed: See Left Handed.
  • ДанныеReversed: See Reversed.
  • ДанныеAngle: The rate at which the radius of the helix increase along the axis. Allowable range: [-89°, +89°].
  • ДанныеReference axis: The helix axis
  • ДанныеMode: The helix input mode (pitch-height, pitch-turns, turns-height)
  • ДанныеOutside: If true, the result will be the intersection of the swept profile and the preexisting body.
  • ДанныеHas Been Edited: If false, the tool will propose an initial value for pitch based on the profile bounding box, so that self intersection is avoided.
  • ДанныеRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
  • ДанныеProfile: Either a sketch containing a closed contour, or a face.
  • ДанныеMidplane: Not used.
  • ДанныеUp to face: Not used.
  • ДанныеAllow multiple face: Not used.