PartDesign SubtractiveCylinder/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign SubtractiveCylinder and the translation is 43% complete.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский

PartDesign SubtractiveCylinder.svg PartDesign SubtractiveCylinder

Menu location
Part Design → Create a subtractive primitive → Subtractive Cylinder
Default shortcut
Introduced in version
See also
Create a subtractive primitive, Additive Cylinder


Вставляет субтрактивный цилиндр в активное Тело. Его форма вычитается из существующего тела.

PartDesign SubtractiveCylinder example.svg

"Слева: активное тело (A) показано серым цветом, а субтрактивный цилиндр (B) показан прозрачным красным цветом; результат справа."


  1. Press the PartDesign SubtractiveCylinder.svg Subtractive Cylinder button. Note: the Subtractive Cylinder is part of an icon menu labelled Create an subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get to the Cylinder button, click on the down arrow besides the visible icon and select Subtractive cylinder in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Cylinder feature appears under the active Body.


It is possible to create skewed prisms by specifying angles in respect to the normal vector of the chosen attachment. introduced in version 0.20

The Cylinder can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.


  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • ДанныеLabel: label given to the Cylinder object. Change to suit your needs.
  • ДанныеRadius: the radius value of the cylinder.
  • ДанныеAngle: angle of rotation of the cross section (360 degrees forms a full cylinder).
  • ДанныеHeight: the length of the cylinder along its axis.
  • ДанныеFirst Angle: angle in first direction. introduced in version 0.20
  • ДанныеSecond Angle: angle in second direction. introduced in version 0.20