PartDesign: SubtractiveBox

From FreeCAD Documentation
This page is a translated version of the page PartDesign SubtractiveBox and the translation is 46% complete.
Outdated translations are marked like this.

PartDesign SubtractiveBox

Menu location
Part Design → Create a subtractive primitive → Subtractive box
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveSubtractive

Descriere

Inserts a subtractive box in the active Body. Its shape is subtracted from the existing solid.

On the left: active body (A) shown in grey and subtractive box (B) shown in transparent red; result on the right.

Cum se folosește

  1. Apăsați butonul Subtractive Box. Notă: Subtractive Box este partea a meniului iconițelor etichetat Create a subtractive primitive.

După lansarea FreeCAD, caseta Subtractive este cea afișată în bara de instrumente. Dacă este afișat un primitiv diferit, faceți clic pe săgeata în jos, în afară de pictogramă, și selectați caseta Subtractor din meniu.

  1. Definiți parametrii Primitivei geometrice și Attachment.
  2. Click pe OK.
  3. O funcție Box apare sub corpul activ Body.

Opţiuni

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Proprietăți

  • DateAttachment: definește modul de tașamante ca și Attachment Offset. A se vedea Part EditAttachment.
  • DateLabel: Label given to the Box object. Change to suit your needs.
  • DateLength: the Box's dimension in the X-direction.
  • DateWidth: the Box's dimension in the Y-direction.
  • DateHeight:dimensiunea Casetei/Box pe direcția Z-direction.