Parça Tasarım Tezgahı - Şekil bağlayıcı oluştur

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign ShapeBinder and the translation is 17% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский

PartDesign ShapeBinder.svg Şekil bağlayıcı oluştur

Menü konumu
Parça tasarım → Şekil bağlayıcı oluştur
Tezgahlar
Parça tasarım
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
0.17
Ayrıca bkz
klonla

Tanım

Etkin Cisim içindeki seçili bir cismi bir referans şekil bağlayıcı oluşturur. Bir şekil bağlayıcı, başka bir cismin kenarlarına veya yüzlerine bağlanan bir referans nesnesidir. Kullanım örneği, iki farklı cisimde fitting kapaklı bir kutu oluşturmak olabilir. Şekil bağlayıcı nesnesi, 3D görünümünde yarı saydam sarı renkte görüntülenir.

A ShapeBinder will track the relative placement of the referenced geometry, which is useful in the context of creating assemblies, if its VeriTrace Support property is set to true. See the Example below to understand how this works.

The referenced geometry can either be a single object (for example a Part Box, a PartDesign Body, or a sketch or Feature inside a Body), or one or more subelements (faces, edges or vertices) belonging to the same parent object. Which geometry should be selected depends on the intended purpose of the ShapeBinder. For a Boolean operation you would need to select a solid. For a Pad operation a face or a sketch can be used. And for the external geometry in a sketch, or to attach a sketch, any combination of subelements may be appropriate. The referenced geometry can also belong to the Body the ShapeBinder is nested in.

Shapebinder flow.png

"Body.Pad004'ten iki şekil seçildi ve referans nesneleri Body001.Sketch005'te Body001.ShapeBinder ile dış geometri olarak mevcut."

Nasıl Kullanılır

  1. Hedef cismi aktif edin.(şekil bağlayıcı nesneye sahip olacak cisim)
  2. PartDesign ShapeBinder.png Şekil bağlayıcı oluştur'a basın.
  3. Nesne veya Geometri ekle tuşlarına basın.
  4. 3D görünümünde, kopyalanacak nesneyi veya geometriyi seçin. Nesne, tüm cismi seçecek; Geometri ekle herhangi bir eleman seçecektir(köşe, kenar, yüz).
  5. Seçilen geometriyi kaldırmak için, Geometriyi kaldır düğmesine basın ve 3D görünümünde geometriyi seçin. İptal etmek için düğmeye tekrar basın.
  6. Alternatif olarak, Şekil bağlayıcı komutunu başlatmadan önce kopyalanacak cisim seçilebilir.
  7. Tamam'a basın.

Seçenekler

Model ağacındaki Şekil bağlayıcı etiketine çift tıklayın veya sağ tıklayın ve parametrelerini düzenlemek için bağlam menüsünde Şekil bağlayıcı Düzenle seçeneğini seçin.

Notes

  • A ShapeBinder can be dragged out of the Body it is nested in, and dropped onto the Document.svg document node in the Tree view. Such an unnested ShapeBinder can be used as the Base Feature for a new Body.
  • A ShapeBinder created from a sketch can have an opposite "tool direction". For example a Pad created from the sketch may extend in the +Y direction, while a Pad, with the same properties, created from the ShapeBinder extends in the -Y direction. Toggling the VeriReversed property (or checkbox) will solve this.

PartDesign SubShapeBinder vs. PartDesign ShapeBinder

See PartDesign SubShapeBinder.

Özellikler

  • VeriLabel:Nesneye verilen isimdir. Bu isim daha sonra değiştirilebilir.
  • VeriTrace Support: Bu seçeneği true olarak ayarlayarak, Şekil bağlayıcı parçaların ve cisimlerin göreceli yerleşimlerini gözlemler.introduced in version 0.18

Example

The example uses the ShapeBinder Feature to make a hole (with or without threads) through more than one body. Normally the Hole function of the Part Design workbench is limited to a single body. The example uses two cubes facing each other but misaligned in an arbitrary way. The holes are created with sketches containing a circle for every hole (the diameter is ignored by the hole function). When you copy the sketch to the other cube it will be at the same position in the local cube coordinate system. In the image this is shown by the white circle on the back cube. This is not what we want, because the hole at that position would not be aligned to the hole in the front cube.

ShapeBinderThroughHole.png

Example setup for showing how to make holes through different bodies. The white circle shows that copying sketches is not enough

Here is how you use the ShapeBinder Feature to achieve it:

  1. Prepare a scene as per the above image. If you use the cubes from the Part workbench, remember that you must put them into a Body container. Each one in a single body container. Otherwise the PartDesign functions would not work. If you build them from sketches the system should create body containers by default.
  2. In the Property editor change the placement of the second cube so that it touches the first cube with a side displacement.
  3. Select the PartDesign workbench
  4. Create a sketch on the front face of the first cube and place a circle anywhere and close the sketch
  5. Select the sketch in the tree and press the PartDesign Hole.svg PartDesign Hole button. Before make sure the first body is the active body (double-click).
  6. Select a hole of appropriate size. The image above had also counterbore selected. Close the Hole function.
    Now the image should look as above. When you hide the first cube (select and press space) you can see that the hole does not reach the second cube. It will not, even when you select Through All, or when you enter a really large distance in the Hole task panel. The hole is always limited to a single body.
    Here is where our ShapeBinder comes in.
  7. First select the back cube. This is the target where the ShapeBinder will be added. It must be actived before, so be sure it has been double-clicked.
  8. In the tree select the sketch we used for the hole. It's important to not activate the first body.
  9. Select the shapeBinder function.
    A task panel should open. In the line Object the name of our sketch should be visible. If you had selected the function without selecting the sketch, you could press Object and then select the sketch from the list. It's recommended to select it first in order to get the right one, especially if you have many sketches with automatically generated names Sketch001,.. Add Geometry is not useful for us, because we want to select the whole sketch. Add Geometry is used if only parts should be selected.
  10. Press OK to close the task panel and check that a new item has been added to the tree of the second cube.
    When you toggle the visibility of the ShapeBinder it is shown yellow in the 3D view. However it's on the wrong position, just as the white circle in the image above. That is because of the default setting for the Trace parameter.
  11. In the PropertyView of the ShapeBinder in the Data tab set the Trace Support parameter to true. The default was false.
    With Trace Support true, the ShapeBinder in not affected by local transformations of the target body, e.g. our translations. The shape remains exactly where the original front object shape has been. Try moving the front object around and you can see that the ShapeBinder always follows to the new position.
  12. Select the ShapeBinder in the tree and press press the PartDesign Hole.svg PartDesign Hole button. If you enter the same values as for the initial hole you will notice that no hole is created in the second cube. This is because a ShapeBinder in some cases has an opposite "tool direction" compared to the referenced sketch. To solve this check the Reverse checkbox. Press OK to finish.
  13. You now have linked holes in two different bodies. If you change the position of the circle in the sketch, both holes will adapt. You can even add new circles in the sketch to create additional linked holes.