PartDesign: Planul

From FreeCAD Documentation
This page is a translated version of the page PartDesign Plane and the translation is 27% complete.
Outdated translations are marked like this.

PartDesign Plane

poziția meniului
PartDesign → Create a datum plane
Ateliere
PartDesign
scurtătură
nici unul
Prezentat în versiune
0.17
A se vedea, de asemenea,
PartDesign Point/ro, PartDesign Line/ro

Descriere

Creați un plan de referință datum plane care poate fi folosit ca referință pentru schițe sau alte forme geometrice de referințe. Schițele pot fi atașate la planele de referință .

"Planul de referință care traversează cele trei colțuri ale cubului cu partea de sus a unui Cilindru folosind planul de referință X-Y".

Cum se folosește

A datum plane, as of FreeCAD 0.18, can only be created inside of a Body. Every body has an origin, which is hidden by default. To be able to refer to the origin base planes, make the the origin visible. You can do this before creating a datum plane.

  1. Apăsați butonul Create a datum plane.
  2. Define Plane parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Apăsați tasta OK.

Opţiuni

Faceți dublu clic pe eticheta DatumPlane din arborescența Model sau faceți clic cu butonul din dreapta și selectați Editați datum din meniul contextual pentru a edita parametrii. Pentru mai multe detalii despre modul referențiere și offset (decalajul referinței), consultați Attachment.

Proprietăți

  • DateMapMode: listează modul de atașare utilizat.
  • DateAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DateLabel: numele dat obiectului, acest nume poate fi modificat dacă vă este mai comod.
  • DateMapMode: lists the attachment mode used.
  • DateAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DateLabel: name given to the object, this name can be changed at convenience.