PartDesign: Oglindirea/ Mirrored

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign Mirrored and the translation is 67% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎română • ‎čeština • ‎русский

PartDesign Mirrored.svg PartDesign Mirrored

Menu location
PartDesign → Mirrored
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Instrumentul Mirrored simetrizează o funcție în plan. Începând cu v0.17, instrumentul poate simetriza multiple funcții(onalități) .

PartDesign Mirrored example.svg

"Deasupra: o funcție Pocket a fost creată dintr-o schiță care conține un cerc (A), Pocket-ul a fost ulterior folosit pentru a crea o caracteristică Mirror. Axa verticală a schiței (B) a fost utilizată ca axă de simetrie. Rezultatul (C) este afișat în partea dreaptă. „“

Cum se folosește

  1. Select the feature(s) to be mirrored. Alternatively, the feature can be selected from a dialogue after step 2.
    v0.16 and below Only a single feature can be selected, and it must be the last one at the bottom of the feature tree.
  2. Press the PartDesign Mirrored.png Mirrored button.
  3. v0.17 and above Press Add feature to add a feature to be mirrored. The feature must be visible in the 3D view:
    1. Switch to the Model tree;
    2. Select in the tree the feature to be added and press spacebar to make it visible in the 3D view;
    3. Switch back to the Tasks panel;
    4. Select the feature in the 3D view; it will be added to the list.
    5. Repeat to add other features.
  4. v0.17 and above Press Remove feature to remove a feature from the list, or right-click on the feature in the list and select Remove.
  5. Define the mirror plane. See Options.
  6. Press OK.

Opţiuni

Mirrored parameters in v0.16 and below.
Mirrored parameters in v0.17 and above.

Plane

When creating a mirrored feature, the Mirrored parameters dialogue offers different ways of specifying the mirror line or plane .

Horizontal sketch axis

Uses the horizontal axis of the sketch as the axis of symmetry.

Vertical sketch axis

Uses the vertical axis of the sketch as the axis of symmetry.

Select reference...

Allows you to select a plane (such as a face of an object) to use as a mirror plane .

Custom Sketch Axis

If the sketch which defines the feature to be mirrored also contains a construction line (or lines), then the drop down list will contain one custom sketch axis for each construction line. The first construction line will be labelled 'Sketch axis 0'. The image below is an example with the sketch in edit mode showing that it includes a construction line for use as the Mirrored axis.

PartDesign Mirrored axis fromconstructionlines.jpg

Base (XY/XZ/YZ) plane

v0.17 and above Select one of the Body Origin's standard planes (XY, XZ or YZ) .

Preview

The mirror result can be previewed in real time before clicking OK by checking "Update view" .


Limite

  • v0.16 and below Numai ultima funcție din arborele proiectului poate fi utilizată pentru simetrizare/Mirror. Prin urmare,
    • nu este posibilă alegerea mai multor elemente care să fie reflectate;
    • nu este posibilă selectarea mai multor caracteristici care să fie adăugate la lista de caracteristici originale.
  • v0.16 and below Once the Mirrored feature has been started or been completed, it is not possible to replace the original feature for a different one .
  • Caracteristica Mirror nu poate să oglindi un întreg corp solid. Pentru asta, a se vedea Part Mirror .
  • Funcția oglindită trebuie să intersecteze solidul (numit și "suport") pe care se bazează sau comanda va eșua.