PartDesign "Создать опорную точку"

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign Line and the translation is 62% complete.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский

PartDesign Line.svg Создать опорную линию

Системное название
PartDesign_Line
Расположение в меню
Part Design → Create a datum → Создать опорную линию
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Создать опорную точку, Создать опорную плоскость

Описание

Creates a datum line which can be used as reference for sketches, other datum geometry or features. For example it can be used as revolution axis for Revolution and Groove features.

Datum line.png

Two Datum lines through opposite corners of the cube meet at the center of mass.

Применение

  1. Press the PartDesign Line.svg Create a datum line button.
  2. Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Опции

Double-click the DatumLine label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Part EditAttachment.

Свойства

  • ДанныеMapMode: lists the attachment mode used.
  • ДанныеAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • ДанныеLabel: name given to the object, this name can be changed at convenience.