PartDesign "Проточка"

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign Groove and the translation is 36% complete.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎čeština • ‎русский

PartDesign Groove.svg Проточка

Системное название
PartDesign_Groove
Расположение в меню
PartDesign → Create a substractive feature → Проточка
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

The Groove tool revolves a selected sketch or profile about a given axis, cutting out material from the support .

PartDesign Groove example.svg

Above: sketch (A) is revolved around axis (B); resulting groove on solid (C) is shown right.

Применение

  1. Select the sketch to be revolved.
    A face on the existing solid can alternatively be used. v0.17 and above
    The sketch must be mapped to the planar face of an existing solid or Part Design feature, or an error message will appear. version 0.16 and below
  2. Press the PartDesign Groove.svg Groove button.
  3. Set the Groove parameters (see next section).
  4. Press OK.

Опции

When creating a groove, the Groove parameters dialogue offers several parameters specifying how the sketch should be revolved.

Partdesign groove parameters.png

Axis

This option specifies the axis about which the sketch is to be revolved.

  • Vertical sketch axis: selects the vertical sketch axis .
  • Horizontal sketch axis: selects the horizontal sketch axis.
  • Sketch axis: selects a construction line contained in the sketch used by the Groove. The first construction line created in the sketch will be labelled Sketch axis 0. The drop down list will contain one custom sketch axis for each construction line. version 0.16 and below
  • Construction line: selects a construction line contained in the sketch used by the Groove. The drop down list will contain an entry for each construction line. The first construction line created in the sketch will be labelled Construction line 1. v0.17 and above
  • Base (X/Y/Z) axis: selects the X, Y or Z axis of the Body's Origin; v0.17 and above
  • Select reference...: allows selection in the 3D view of an edge on the Body, or a datum line. v0.17 and above

Angle

This controls the angle through which the groove is to be formed, e.g. 360° would be a full, contiguous revolution. It is not possible to specify negative angles (use the Reversed option instead) or angles greater than 360° .

Symmetric to plane

If checked, the groove will extend half of the specified angle in both directions from the sketch plane .

Reversed

If checked, the direction of revolution is reversed from default clockwise to counterclockwise .

Свойства

Below are properties which can be defined after creation of the feature. Data properties Base and Axis are uneditable .

  • ДанныеAngle: angle of rotation. See Angle .
  • ДанныеLabel: label given to the operation, can be changed at convenience.
  • ДанныеMidplane: true or false. See Symmetric to plane.
  • ДанныеReversed: true or false. See Reversed.
  • ДанныеRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details. v0.17 and above