PartDesign: Pană Aditivă

From FreeCAD Documentation
This page is a translated version of the page PartDesign AdditiveWedge and the translation is 43% complete.
Outdated translations are marked like this.

PartDesign AdditiveWedge

Menu location
Part Design → Create an additive primitive → Additive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveAdditive

Descriere

Inserează o primitivă geometrică tip pană în corpul activ ca prima funcție(onalitate) sau se conectează la funcționalitățile existente.

Cum se folosește

  1. Apăsați butonul Additive Wedge . Note: the Additive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Additive Wedge in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. O funcție tip Pană apare sub Corpul activ.

Opţiuni

Pana(Wedge) poate fi editată după crearea ei în douăî moduri:

  • Dublu-clicking în arborescența Model, sau prin clic drapta și selectarea Edit primitive ăn meniul contextula; aceasta aduce parametrii Primitive .
  • Via Property editor.

Proprietăți

Utilizarea plasamentului implicit, intrările de mai jos sunt:

  • DateX min/max : Base face X axis span
  • DateY min/max: Wedge height span
  • DateZ min/max : Base face Z axis span
  • DateX2 min/max : Top face X axis span
  • DateZ2 min/max : Top face Z axis span

Pyramids

Wedges can be used to create pyramids by setting DateX2 min/max and DateZ2 min/max each so that min = max.