PartDesign "Аддитивная сфера"

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign AdditiveSphere and the translation is 67% complete.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский

PartDesign AdditiveSphere.svg Аддитивная сфера

Системное название
PartDesign_AdditiveSphere
Расположение в меню
Part Design → Создать аддитивный примитив → Аддитивная сфера
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Создать аддитивный примитив

Описание

Inserts a primitive sphere in the active Body as the first feature, or fuses it to the existing feature(s).

PartDesign AdditiveSphere example.png

Применение

  1. Press the PartDesign AdditiveSphere.svg Additive Sphere button. Note: the Additive Sphere is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get the Sphere, click on the down arrow besides the visible icon and select Additive Sphere in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Sphere feature appears under the active Body.

Опции

The Sphere can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Свойства

  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • ДанныеLabel: Label given to the Sphere object. Change to suit your needs.
  • ДанныеRadius: Radius of the sphere.
  • ДанныеAngle1: (labelled V parameter in the Primitive parameters) lower truncation of the sphere, parallel to the circular cross section (-90 degrees in a full sphere)
  • ДанныеAngle2: (unlabelled in the Primitive parameters) upper truncation of the ellipsoid, parallel to the circular cross section (90 degrees in a full sphere).
  • ДанныеAngle3: (labelled U parameter in the Primitive parameters) angle of rotation of the cross section (360 degrees in a full sphere).