PartDesign AdditiveCone/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign AdditiveCone and the translation is 33% complete.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский

PartDesign AdditiveCone.svg PartDesign AdditiveCone

Menu location
Part Design → Create an additive primitive → Additive Cone
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign Create an additive primitive, PartDesign Subtractive Cone

Описание

Inserts a primitive cone in the active Body as the first feature, or fuses it to the existing feature(s).

PartDesign AdditiveCone example.png

Применение

  1. Press the PartDesign AdditiveCone.svg Additive Cone button. Note: the Additive Cone is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get to the Cone button, click on the down arrow besides the visible icon and select Additive Cone in the menu.
  2. Set the Primitive parameters (for a complete cone, set one of the radii to zero) and the Attachment.
  3. Click OK.
  4. A Cone feature appears under the active Body.

Опции

The Cone can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Свойства

  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • ДанныеLabel: label given to the Cone object. Change to suit your needs.
  • ДанныеRadius1: the radius value at the cone's base.
  • ДанныеRadius2: the radius value at the cone's top. A non-zero value creates a truncated cone.
  • ДанныеHeight: the height of the cone along its axis.
  • ДанныеAngle: angle of rotation of the cross section (360 degrees in a full cone).