PartDesign AdditiveBox/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page PartDesign AdditiveBox and the translation is 33% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский

PartDesign AdditiveBox.svg PartDesign AdditiveBox

Системное название
PartDesign AdditiveBox
Расположение в меню
Part Design → Create an additive primitive → Additive Box
Быстрые клавиши
Представлено в версии
См. также
PartDesign Primitive additive


Вставляет примитивный блок в активное тело в качестве первого элемента или объединяет его с существующим элементом (ами).

PartDesign AdditiveBox example.png


  1. Press the PartDesign AdditiveBox.svg Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.


The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.


  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • ДанныеLabel: Label given to the Box object. Change to suit your needs.
  • ДанныеLength: the Box's dimension in the X-direction.
  • ДанныеWidth: the Box's dimension in the Y-direction.
  • ДанныеHeight: the Box's dimension in the Z-direction.