PartDesign: Casetă aditivă

From FreeCAD Documentation
This page is a translated version of the page PartDesign AdditiveBox and the translation is 42% complete.
Outdated translations are marked like this.

PartDesign Casetă aditivă

poziția meniului
Part Design → Create an additive primitive → Additive Box
Ateliere
PartDesign
scurtătură
nici unul
Prezentat în versiune
0.17
A se vedea, de asemenea,
PartDesign Primitive additive

Descriere

Include o primitivă tip casetă într-un Corp activ (Body) ca prima sa funcționalitate sau îl îmbină cu funcționalitățile existente.

Cum se folosește

  1. Apăsați butonul Additive Box . Notă: Adăugarea casetei face parte dintr-un meniu cu pictograma Create an additive primitive. După lansarea FreeCAD, Additive Box este cea afișată în bara de instrumente. Dacă este afișat o primitivă diferită, faceți clic pe caseta Adăugare săgeată din meniu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Opţiuni

Caseta poate fi editată după crearea acesteia în două moduri:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Proprietăți

  • DateAttachment: definește atât modul atașament și decalajjul față de atașamentul (Offset). Vezi Part EditAttachment.
  • DateLabel: Label given to the Box object. Change to suit your needs.
  • DateLength: the Box's dimension in the X-direction.
  • DateWidth: the Box's dimension in the Y-direction.
  • DateHeight: the Box's dimension in the Z-direction.