Install on Unix
För tillfället, så erbjuder FreeCAD teamet endast installerare för 32bit Debian och Ubuntu system, men en del medlemmar av FreeCADs användargrupp erbjuder även anpassade installerare för andra Linuxvarianter. Ta en titt på Nedladdningssidan sidan för att se vad som för tillfället finns tillgängligt.
Once you've got FreeCAD installed, it's time to get started!
- 1 Installation på Debian/Ubuntu system
- 2 Official Ubuntu repository
- 3 Stable PPA through the graphical interface
- 4 Stable PPA through the console
- 5 Daily PPA through the console
- 6 Debian and other debian-based systems
- 7 OpenSUSE
- 8 Gentoo
- 9 Fedora
- 10 Arch
- 11 Other
Installation på Debian/Ubuntu system
När du har laddat ned den .deb som motsvarar din systemversion, och om du har Gdebi paketet installerat (det är det vanligtvis), så behöver du bara navigera till där du laddade ned filen, och dubbelklicka på den. Nödvändiga beroenden kommer att tas hand om automatiskt av din pakethanterare. Alternativt, så kan du även installera den från terminalen, genom att navigera till där du laddade ned filen, och skriva:
sudo dpkg -i Name_of_your_FreeCAD_package.deb
byt Name_of_your_FreeCAD_package.deb till namnet på den fil som du laddade ned.
Efter att du har installerat FreeCAD, så kommer en startikon läggas till i "Grafik" sektionen i din startmeny.
Many Linux distributions are based on Ubuntu and share its repositories. Besides official variants (Kubuntu, Lubuntu and Xubuntu), there are non official derivatives like Linux Mint, Voyager and others. The installation options below should be compatible with these systems.
Official Ubuntu repository
FreeCAD is available from the Ubuntu Universe repository, and can be installed via the Software Center or from the terminal:
sudo apt install freecad
Note: the Ubuntu Universe package may be outdated as the packaging may lag behind the latest stable source code. In this case, it is suggested to install the package from the
-stable PPA below. In addition, installing the
-daily package can be done to test the development branch.
Stable PPA through the graphical interface
To install FreeCAD using the personal package archive (PPA) maintained by the FreeCAD project, please follow these instructions. The repository is called freecad-stable on Launchpad.
- Navigate to Ubuntu Software → Software & Updates → Software Sources → Other Software
- Click on , then copy and paste the following line
- Add the source, close the dialog, and reload your software sources, if asked.
Now you can find and install the last stable FreeCAD version from the Ubuntu Software Center.
Stable PPA through the console
- Add the PPA to your software sources:
sudo add-apt-repository ppa:freecad-maintainers/freecad-stable
- Retrieve the updated package lists:
sudo apt update
- Then install FreeCAD along with its offline documentation:
sudo apt install freecad freecad-doc
Note: due to packaging problems, in certain versions of Ubuntu the
freecad-doc package has collided with the installation of FreeCAD or one of its dependencies; if this is the case, remove the
freecad-doc package, and only install the
freecad package. If the
freecad-doc package doesn't exist, then ignore it.
Once you have the stable PPA added to your sources, the
freecad package will install this PPA version over the one provided by the Ubuntu Universe repository. You can see the available versions with
apt-cache policy freecad
freecad: Installed: (none) Candidate: 2:0.18.4+dfsg1~201911060029~ubuntu18.04.1 Version table: 2:0.18.4+dfsg1~201911060029~ubuntu18.04.1 500 500 http://ppa.launchpad.net/freecad-maintainers/freecad-stable/ubuntu bionic/main amd64 Packages 0.16.6712+dfsg1-1ubuntu2 500 500 http://archive.ubuntu.com/ubuntu bionic/universe amd64 Packages ubuntu@ubuntu:~$ apt-cache policy freecad-doc
Run the stable (PPA) version of FreeCAD:
Daily PPA through the console
As FreeCAD is in constant development, you may wish to install the daily package to keep with the latest improvements and bug fixes. The repository is called freecad-daily on Launchpad.
This version is compiled daily from the official master repository. Please beware that although it will contain new features and bug fixes, it may also have newer bugs, and be unstable.
Add the daily PPA to your software sources, update the package lists, and install the daily package:
sudo add-apt-repository ppa:freecad-maintainers/freecad-daily sudo apt-get update sudo apt-get install freecad-daily
Every day you can update to the latest daily:
sudo apt-get update sudo apt-get install freecad-daily
Note: in some cases new code or dependencies added to FreeCAD will cause packaging errors; if this happens, a daily package may not be generated until the maintainers manually fix the problems. If you wish to continue testing the latest code, you should get the source code and compile FreeCAD directly; for instructions see compiling.
Run the daily (PPA) version of FreeCAD:
Note: it is possible to install both the
-daily packages in the same system. This is useful if you wish to work with a stable version, and still be able to test the latest features in development. Notice that the executable for the daily version is
freecad-daily, but for the stable version it is just
Debian and other debian-based systems
Since Debian Lenny, FreeCAD is available directly from the Debian software repositories and can be installed via synaptic or simply with:
sudo apt-get install freecad
A vast release program for FreeCAD package builds are offered.
For installing of stable releases, please visit for a survey:
Generally for selecting the correct openSUSE distribution needed it is necessary to click on the particular view button.
The stable package version of FreeCAD could be found under:
The correct openSUSE distribution version must be selected in the lower part of the web page.
FreeCAD is typically installed with YAST (abbr. Yet another Setup Tool) the Linux operating system setup and configuration tool, or in any terminal (root rights required) with:
zypper install FreeCAD
This procedure only covers the installation of officially released stable FreeCAD program versions, depending on the installed links to the program package repositories of your OS.
To check out the latest development releases (unstable) you have to visit:
It is recommended to grab the binary packages directly. Then select the correct distribution for your installed openSUSE OS.
FreeCAD can be built/installed simply by issuing:
FreeCAD has been included in the official Fedora packages since Fedora 20. It can be installed from the command line with:
sudo dnf install freecad
On older Fedora releases, that was:
sudo yum install freecad
The gui packages managers can also be used. Search for "freecad". The official release package version tends to be well behind the FreeCAD releases. Package: freecad shows the versions included in the Fedora repositories over time and versions.
More current versions can be obtained by downloading one of the .AppImage releases from the github repository. These work fine on Fedora.
If you want to keep up with the absolute latest daily builds, FreeCAD is also available on copr. To install the build from there, in a terminal session, enter:
sudo dnf copr enable @freecad/nightly sudo dnf install freecad
That leaves the copr repository active, so
sudo dnf upgrade
or equivalent, will update to the latest FreeCAD build, along with updates from any of the other active repos. If you want something a bit more stable, you can disable @freecad/nightly again after the initial install. The copr repository only keeps builds from the past 2 weeks. This is not a solution if you want to pick a specific older version.
Instructions are also available on compile FreeCAD yourself, including a script specifically for Fedora. With a minor change, to checkout the specific commit from git, any version since about FreeCAD 0.15 can be built on any distribution since Fedora 21.
Installing FreeCAD on Arch Linux and derivatives (ex. Manjaro):
pacman -S freecad
If you find out that your system features FreeCAD but is not documented in this page, please tell us on the forum!
Many alternative, non-official FreeCAD packages are available on the net, for example for systems like slackware or fedora. A search on the net can quickly give you some results.
Manual install on .deb based systems
Once you downloaded the .deb corresponding to your system version, if you have the Gdebi package installed (usually it is), you just need to navigate to where you downloaded the file, and double-click on it. The necessary dependencies will be taken care of automatically by your system package manager. Alternatively you can also install it from the terminal, navigating to where you downloaded the file, and type:
sudo dpkg -i Name_of_your_FreeCAD_package.deb
changing Name_of_your_FreeCAD_package.deb by the name of the file you downloaded.
After you installed FreeCAD, a startup icon will be added in the "Graphic" section of your Start Menu.
Installera på andra Linux/Unix system
Olyckligtvis finns det för tillfället inga förkompilerade paket för andra Linux/Unix system, så du får kompilera FreeCAD själv.
Many common Linux distros now include a precompiled FreeCAD as part of the standard packages. This is often out of date, but is a place to start. Check the standard package managers for your system. One of the following (partial) list of commands could install the official version of FreeCAD for your distro from the terminal. These probably need administrator privileges.
apt-get install freecad dnf install freecad emerge freecad slackpkg install freecad yum install freecad zypper install freecad
The package name is case sensitive, so try `FreeCAD` as well as `freecad`. If that does not work for you, either because your package manager does not have a precompiled FreeCAD version available, or because the available version is too old for your needs, you can try downloading one of the .AppImage releases from the github repository. These tend to work on most 64 bit Linux distributions, without any special installation. Just make sure the downloaded file is marked as executable, then run it.
If that still is not good enough, and you can not locate another source of a precompiled package for your situation, you will need to compile FreeCAD yourself.
Installing Windows Version on Linux
See the Install on Windows page.