Imagen CrearImagenPlano

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Image CreateImagePlane and the translation is 29% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎русский • ‎中文(中国大陆)‎
Arrow-left.svg Image-import.svg Abrir Anterior:
Siguiente: Escalado Image-scale.svg Arrow-right.svg

Image CreateImagePlane.svg Image CreateImagePlane

Menu location
Toolbars → Create a planar image in the 3D space
Workbenches
Image
Default shortcut
None
Introduced in version
-
See also
Image Open, Image Scaling


Descripción

The CreateImagePlane tool imports a bitmap image and places it on one of the XY, YZ or XZ planes.

Utilización

  1. Press the Image CreateImagePlane.svg Image Plane button.
  2. Select the desired image in your system.
  3. Choose the plane where the image will be placed, give an offset value, and press OK.

The resulting ImagePlane object uses the ratio of 1 pixel to 1 millimeter; in order for the image to display well, it should have enough resolution.

When importing the image, you may wish to add an offset of -0.1 mm in order to place the image slightly behind the working plane; this will make it easy to trace (draw on top) the image with the Draft or Sketcher tools.

If no offset is given to the image initially, its position can still be adjusted in the property editor.

Propiedades

Base

  • DataPosition: specifies the coordinates of the base point of the image plane.
  • DataAngle: specifies the angle of rotation of the image plane.
  • DataAxis: specifies the axis used for the rotation angle.

Image Plane

  • DataXSize: specifies the width of the image plane.
  • DataYSize: specifies the height of the image plane.
  • DataImage Plane: specifies the image to use for this plane.


Arrow-left.svg Image-import.svg Abrir Anterior:
Siguiente: Escalado Image-scale.svg Arrow-right.svg