FreeCAD Vektor Mathematische Bibliothek

From FreeCAD Documentation
This page is a translated version of the page FreeCAD vector math library and the translation is 100% complete.

Einleitung

Dies ist eine Python-Modul mit einigen nützlichen Funktionen zur Manipulation von Vektoren. Diese Bibliothek ist im Draft-Arbeitsbereich enthalten und kann so vom Python-Interpreter aus aufgerufen werden:

import DraftVecUtils

Bitte beachte, dass dieses Modul vor langer Zeit erstellt wurde, als die Vector-Klasse viele ihrer Methoden noch nicht hatte. Nun können diese Operationen von der Vector-Klasse selbst erledigt werden.

Obwohl das DraftVecUtils-Modul weiterhin existiert und es immer noch im Draft-Arbeitsbereich benutzt wird, ist es vermutlich besser, für neue Entwicklungen direkt die Vector-Methoden zu verwenden.

Funktionen

Vektoren sind die Bausteine fast aller geometrischen 3D-Operationen, daher ist es nützlich, ein wenig über sie zu wissen, um zu verstehen, wie diese Funktionen für Dich nützlich sein können. Ein paar gute Seiten, um die Grundlagen der Vektor-Mathematik zu lernen:

"""Vector math library for FreeCAD"""

import math
import FreeCAD
 
def add(first, other):
    """add(Vector,Vector) - adds two vectors"""
    if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
        return FreeCAD.Vector(first.x+other.x, first.y+other.y, first.z+other.z)
 
def sub(first, other): 
    """sub(Vector,Vector) - subtracts second vector from first one"""
    if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
        return FreeCAD.Vector(first.x-other.x, first.y-other.y, first.z-other.z)
 
def scale(first,scalar):
    """scale(Vector,Float) - scales (multiplies) a vector by a factor"""
    if isinstance(first,FreeCAD.Vector):
        return FreeCAD.Vector(first.x*scalar, first.y*scalar, first.z*scalar)
 
def length(first):
    """lengh(Vector) - gives vector length"""
    if isinstance(first,FreeCAD.Vector):
        return math.sqrt(first.x*first.x + first.y*first.y + first.z*first.z)
 
def dist(first, other):
    """dist(Vector,Vector) - returns the distance between both points/vectors"""
    if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
        return length(sub(first,other))
 
def normalized(first):
    """normalized(Vector) - returns a unit vector"""
    if isinstance(first,FreeCAD.Vector):
        l=length(first)
        return FreeCAD.Vector(first.x/l, first.y/l, first.z/l)
 
def dotproduct(first, other):
    """dotproduct(Vector,Vector) - returns the dot product of both vectors"""
    if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
        return (first.x*other.x + first.y*other.y + first.z*other.z)
 
def crossproduct(first, other=FreeCAD.Vector(0,0,1)):
    """crossproduct(Vector,Vector) - returns the cross product of both vectors. 
    If only one is specified, cross product is made with vertical axis, thus returning its perpendicular in XY plane"""
    if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
        return FreeCAD.Vector(first.y*other.z - first.z*other.y, first.z*other.x - first.x*other.z, first.x*other.y - first.y*other.x)
 
def angle(first, other=FreeCAD.Vector(1,0,0)):
    """angle(Vector,Vector) - returns the angle in radians between the two vectors. 
    If only one is given, angle is between the vector and the horizontal East direction"""
    if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
        return math.acos(dotproduct(normalized(first),normalized(other)))
 
def project(first, other):
    """project(Vector,Vector): projects the first vector onto the second one"""
    if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
        return scale(other, dotproduct(first,other)/dotproduct(other,other))