This page holds different settings and parameters that you can use to fine-tune your FreeCAD installation or overcome problems.
The FreeCAD Preferences Editor under menu Edit → Preferences is commonly used to set and manipulate the FreeCAD parameters table.
However, it is also possible to access, modify and create parameters manually, using the Parameter Editor found under menu Tools → Edit parameters.
The list below shows parameters that are not accessible via the preferences editor, but that you can set manually (located in BaseApp/Preferences)
- Bitmaps/Theme/ThemeSearchPaths (boolean): Set to
falseso FreeCAD uses it's included icons instead of the system icon theme on Linux.
- DockWindows/DAGView/Enabled (boolean): Set to
trueto enable a beta DAG view dockable widget. After changing the parameter value, a FreeCAD restart is needed so the widget is available in the View/Panels list.
- DockWindows/PropertyView/Enabled (boolean): Set to
trueto enable a Property View dockable widget independent from the Combo View. After changing the parameter value, a FreeCAD restart is needed so the widget is available in the View/Panels list.
- DockWindows/TreeView/Enabled (boolean): Set to
trueto enable a Tree View dockable widget independent from the Combo View. After changing the parameter value, a FreeCAD restart is needed so the widget is available in the View/Panels list.
- Document/AutoNameDynamicProperty (boolean): Set to
trueto make FreeCAD automatically rename dynamic properties with an invalid specified name instead of throwing an exception. Note that Python code will not have access to the new name.
- Document/ChangeViewProviderTouchDocument (boolean): Set to
falseso items visibility changes won't mark the document as changed.
- Document/SaveThumbnailFix (boolean): Set to
trueto fix a problem with Qt5 that prevents the generation of
- General/LockToolBars (boolean): Set to
trueto prevent toolbars from being draggable, and to hide the small drag handles. Mostly used in conjunction with stylesheets that make the toolbars vertical.
- General/RecentIncludesExported (boolean): Set to
trueto include exported files in the Recent Files list. Defaults to
- General/RecentIncludesImported (boolean): Set to
falseto exclude imported files from the Recent Files list. Defaults to
- Macro/DuplicateFrom001 (boolean): Set to
trueto always begin searching for suggested duplicate macro filename with @001 instead of current @NNN, if applicable. Defaults to
- Macro/DuplicateIgnoreExtraNote (boolean): Set to
trueto ignore extra note when suggesting duplicate macro filename. Extra note is text in the filename following "@NNN" and before ".FCMacro". Example: "firstname.lastname@example.org_note.FCMacro". If
truethe next suggested filename is "my_macro@006.FCMacro". If set to
falsethe next suggested filename is "email@example.com_note.FCMacro". To be recognized as an extra note the text should begin with a dot (".") following the "@NNN". Otherwise, for example "my_macro@006_my_note.FCMacro" gets "my_macro@006_my_note@001.FCMacro" as suggested new filename, which might be desirable in some cases. Defaults to
- Macro/ReplaceSpaces (boolean): Set to
falseif you do not want spaces in your filenames automatically converted to underscores when creating, renaming, or duplicating a macro. Does not affect existing files, only matters when creating new file or renaming or duplicating existing file. Defaults to
- Mod/Draft/defaultCameraHeight (int): Sets the height of the camera when Draft starts in an empty document. 0 disables, FreeCAD default is 5, good when working in millimeters, a good height for arch work is 4500.
- Mod/Part/ParametricRefine (boolean): Set to
falseso Part RefineShape creates an independent copy rather than a linked one. Defaults to
- Mod/PartDesign/AdditiveHelixPreview (boolean): Set to
trueto ensure an additive helix that does not intersect the body is visible in the preview. Defaults to
- Mod/PartDesign/SubtractiveHelixPreview (boolean): Set to
trueto ensure a subtractive helix that does not intersect the body is visible in the preview. Defaults to
- Mod/PartDesign/SwitchToTask (boolean): Set to
falseto prevent the PartDesign Workbench from switching to the Task panel when starting. Defaults to
- Mod/PartDesign/SwitchToWB (boolean): Set to
falseto prevent the PartDesign Workbench to be automatically called when a PartDesign Body is activated. Defaults to
- Mod/Sketcher/RadiusDiameterConstraintDisplayBaseAngle (float): Set the angle (from horizontal) used to display radius/diameter constraints in Sketcher at creation time. Default is 15 degrees (if no value set).
- Mod/Sketcher/RadiusDiameterConstraintDisplayAngleRandomness (float): Set an angle randomness on the above value. Value is the range of the random angle, centered on base angle. Default is 0 degree -- disabled -- (if no value set).
- PropertyView/AutoTransactionView (boolean): Set to
trueso changes of View tab properties are added to the undo stack (hence are undoable). Defaults to
- Selection/AutoShowSelectionView (boolean): Set to
trueto make the Selection View pane show automatically when selecting something. Defaults to
- View/NavigationDebug (boolean): enables debug output of navigation styles (as of v0.19, only Gesture navigation style has something to say).
- View/SavePicture (string): Set to FramebufferObject, PixelBuffer or CoinOffscreenRenderer for different methods to produce images from the 3D view.
Имя файла по умолчанию при Экспорте
- General/ExportDefaultFilenameMultiple (string): Set the default filename to use when exporting multiple objects. Defaults to "%F".
- General/ExportDefaultFilenameSingle (string): Set the default filename to use when exporting a single object. Defaults to "%F-%P-".
Both of these options support the automatic insertion of various pieces of information into the filename, using the following format characters:
- %F - the name of the .FCStd file (or the label, if it is not saved yet)
- %Lx - the label of the selected object(s), separated by character 'x'
- %Px - the label of the selected object(s) and their first parent, separated by character 'x'
- %U - the date and time, in UTC, ISO 8601
- %D - the date and time, in local timezone, ISO 8601
Any other characters are treated literally. If the resulting filename is illegal it will be changed on saving, with illegal characters replaced by the underscore (_).
Sketcher Constraint Label Colors
The label in Sketcher that displays the current status of the constraints (e.g. "Underconstrained," "Overconstrained," "Fully Constrained," etc.) is styleable on a per-state basis either using the Qt stylesheet, or via user preferences. User preferences take precedence if they have been set (in Mod/Sketcher/General):
- EmptySketchMessageColor - Defaults to 50% opacity black
- UnderconstrainedMessageColor - Defaults to black
- MalformedConstraintMessageColor - Defaults to red
- ConflictingConstraintMessageColor - Defaults to red
- RedundantConstraintMessageColor - Defaults to orange red
- PartiallyRedundantConstraintMessageColor - Defaults to royal blue
- SolverFailedMessageColor - Defaults to red
- FullyConstrainedMessageColor - Defaults to green
Связанные с Мышью
- General/ComboBoxWheelEventFilter (boolean): Set to
trueso widgets do not catch mouse wheel event and prevent scrollable areas to be scrolled. Needs FreeCAD restart to be taken into account.
- View/GestureMoveThreshold (integer): the distance (px) mouse cursor has to move to enter rotation or pan modes of Gesture navigation style. Default is 5.
- View/GestureRollFwdCommand, View/GestureRollBackCommand (string): commands to be executed by mouse button roll gestures of Gesture navigation style.
- View/GestureTapHoldTimeout (integer): sets for how long to wait (in milliseconds) to enter pan mode in Gesture navigation style. It can be helpful to increase it if dragging geometry in sketcher is difficult. Default is 700.
Сочетания клавиш Клавиатуры
- General/TasksKeyEsc (boolean): Create and set to
falseto disable the key exiting the Task panel in all workbenches (that is if the task panel has focus). Note: Superceded by Sketcher Preferences.
- Mod/Sketcher/ViewKeyEsc (boolean): Create and set to
falseto disable key issues with pressing one to many times, when escaping sketcher geometry/constraints creation continue mode (see forum thread)
- TechDraw Workbench has several hidden switches documented in TechDraw Preferences.
- Path Workbench has a switch to enable experimental features documented in Path experimental.
- BIM Workbench:
- Mod/BIM/DefaultPageScale (float): Default scaling for new TechDraw pages created from the BIM Workbench, in case the template doesn't contain any "Scale" or "Scaling" (text insensitive) editable text field.