Această pagină colectează toate informațiile despre sistemul de rezolvare FEM utilizat de FEM Workbench al FreeCAD. Interfața dintre un solver și FreeCAD în pre- și post-procesare se face prin fișiere text. Acest lucru înseamnă teoretic orice solver care utilizează fișiere text este capabil să lucreze împreună cu FreeCAD FEM.
This page collects information on the finite element solvers used by the FEM Workbench. The interface between a solver and FreeCAD in pre-processing as well as post-processing is done through text files. This means that in theory any solver which can be configured and controlled by means of text files is able to work together with FreeCAD; a proper parser and writer of input and output files needs to be programmed for this communication to work. A forum topic to discuss and announce anything regarding the various solvers can be found here: General FEM solvers discussion topic.
Versiunea Solver în diferite distribuții Linux
The FreeCAD-dependencies repository tracks the dependencies of FreeCAD across many Linux distribution. The FEM.md page looks at available open source FEA solvers that could be used with the FEM Workbench. The page shows the version of a particular solver in the repository of a particular Linux distribution. This information is useful to know if a solver is current, or out of date and must be upgraded.
The information is also discussed in the forum: supported and not supported Solver.
Solvers with an interface in FreeCAD
These solvers are well integrated into FreeCAD, which means that it's possible to set up and run a simulation project from the graphical interface and buttons in the FEM Workbench.
This is the first solver that was integrated to work with the FEM Workbench. CalculiX is designed principally for static, thermo-mechanical, and modal analyses. More information about this solver is in FEM CalculiX.
The Elmer multiphysics solver was integrated into FreeCAD as a Google Summer of Code 2017 project: main website, community portal, code repository, Elmer Integration (GSoC) - Activity Log (forum topic).
Mystran is a structural analysis program which uses Nastran input file format. It is released under MIT license. Which means it seems OpenSource. See main website, code repository and Mystran-FreeCAD-forum (forum topic).
The Z88 solver is designed for linear static simulations with an emphasis on teaching about the finite element method. It was the second solver to be integrated into FreeCAD. Afterwards, the integration was improved as a Google Summer of Code 2017 project.
See the information:
- Main website, download page, source code repository (and precompiled binaries).
- Release notes: Z88os V15 released 17.07.2017, Z88os V13 released 20.05.2009 (version in Debian Jessie 8, Stretch 9, Buster 10).
- How to use Z88 in FEM? (forum topic).
There are two versions, Z88OS is the open source edition, while Z88Aurora is freeware, and includes a graphical interface and additional solution methods.
Solvers implemented as external workbenches
DesignSPHysics is an external workbench built into FreeCAD that provides a graphical user interface for DualSPHysics: main website, code repository, Interesting project: DesignSPHysics fluid simulator (forum topic).
DesignSPHysics can be installed through the AddonManager.
FastHenry and FasterCap
The EM Workbench is an external workbench that was created to serve as the front-end for these electromagnetic solvers. FastHenry, for 3D magneto-quasistatic impedance analysis, is fully supported, while FasterCap is accessible through some Python macros.
The EM Workbench can be installed through the AddonManager.
fcFEM is a finite element solver for structural and mechanical studies, implemented in Python, and which can be run directly from FreeCAD without calling external binary solvers. Therefore, it can be considered FreeCAD's own internal solver.
fcFEM was designed to overcome certain limitations from other solvers, such as CalculiX, in order to perform various structural engineering studies.
Some of the problems that are intended to be overcome by this solver include
- Mixed mesh analyses (solid-shell) for dealing with composite columns or prefabricated architectural components: FEM object types (forum topic).
- Improved beam and shell elements, as CalculiX's beam elements seem to give wrong results: CalculiX 3-node Beam Element (forum topic), FEM object types (forum topic), Example for 1D analysis (forum topic).
- Arc-length control for overcoming limit points for elastic-plastic collapse analysis: FEM - Tubular Connection with Shell Elements (forum topic).
- Zero-thickness interface elements for various applications, like post-tensioned concrete with friction: pre-stressed pre/post-tensioned concrete bridge (forum topic).
The author considers FreeCAD a good prototyping platform to quickly set up, test, and visualize different structural problems, so having an integrated yet flexible solver is very helpful. See fcFEM - FEA from start to finish (main forum topic).
fcFEM is packaged as a python library and a macro, and can be downloaded from the github repository. It will eventually be available from the AddonManager, or will be distributed as part of FreeCAD itself.
OpenFoam is available in FreeCAD through two external workbenches:
While Cfd is intended to be feature-complete for advanced users, CfdOF focuses on users that are just starting in the world of CFD and OpenFoam.
Implementation in progress
FEniCS is a computing framework for solving partial differential equations (PDEs), with high-level programming interfaces in Python and C++. It can be used to establish scientific problems in finite element formulations that then can be solved numerically.
FenicsSolver is a simulation platform to deal with multi-body, multi-physics (coupled), multi-scale problems. It hopes to integrate the FEniCS solver into both the FEM Workbench and the Cfd external workbench, so the resulting system functions like a free alternative to Comsol or Moose. FenicsSolver is being developed by the same author of Cfd.
OOFEM is an object oriented FEM program by the Czech Technical University, for solving mechanical, transport and fluid mechanics problems.
It was mentioned as having some advantages over CalculiX, like interface elements (pre-stressed pre/post-tensioned concrete bridge (forum topic)), and arc-length control for elastic-plastic collapse analysis (FEM - Tubular Connection with Shell Elements (forum topic)).
Until the solver integration is completed and the new code is merged into the main FreeCAD repository, the required files for using the solver in the FEM Workbench can be downloaded from a forked FreeCAD branch. For a implementation overview have a look at the very clean commit history https://github.com/berndhahnebach/FreeCAD_bhb/commits/femoofem
- OpenSource general purpose Multibody Dynamics analysis software
- FreeCAD as pre-post processor for MBDyn (forum topic)
Solvers not integrated
The following solvers have not been integrated into FreeCAD but they have garnered some interest by the user community. If a developer wishes to create a communication bridge for a particular solver, he or she should refer to the FEM subforum for advice and assistance.
The following articles may be outdated, but the information they contain may still be useful to understand how to integrate solvers into FreeCAD
Agros2D and Hermes
Agros2D is a multiplatform graphical program designed for solving different physical problems. Internally it uses the Hermes C++ libraries for the solution of simple and complex time-dependent nonlinear partial differential equation (PDE) systems using a general version of the finite element method (hp-FEM). Main code repository, and tutorials.
Code-Aster and Code-Saturne
Code-Aster is an open source multiphysics solver; together with the Salomé-Meca pre-processor they form a simulation platform developed by EDF-GDF, France's biggest energy company. It was an early package considered for inclusion in FreeCAD: FreeCAD and Code-Aster/Salome-Meca (forum topic).
Code-Saturne is a free, open-source software developed and released by EDF to solve computational fluid dynamics (CFD).
FElt is a finite element package to solve linear static and dynamic structural analysis problems. The original code is outdated, so it was forked to a new repository to revive the project and make it compile in a modern system.
It was suggested in the forums to perform reinforced concrete frames analysis (beam and column assemblies) using 1D beam elements: Automation in Design (forum topic), Felt in FEM Workbench (forum topic).
Frame3DD is a software package for static and dynamic structural analysis of 2D and 3D frames and trusses, main repository. A preliminary reader for input files was announced in the forums: Test read data from Frame3DD file. General topic in the FEM forum: Frame3DD.
- http://www.impact-fem.org/ (broken link)
libMesh is a c++ finite element library for the numerical solution of partial differential equations, with a major goal to provide support for adaptive mesh refinement (AMR) computations in parallel: code repository.
It was suggested to integrate this library into FreeCAD as part of a Google Summer of Code project: GSOC 2019 Configuration Management Project (forum topic).
Modelica is a language to model and optimize complex, and interconnected physical systems, for example, mechanical, electrical, thermal, hydraulic, and others. The language itself and its standard libraries are open source. Some simulation environments based on Modelica, like Catia's Dymola, are proprietary, but there are also free implementations like OpenModelica and JModelica.
With FreeCAD, Modelica was suggested to help perform animations, but more broadly it could be used in mechanical and building engineering to solve equations and optimize a particular design: Modelica (forum topic).
The PyFMI package contains Python bindings to work with FMU models, which are standardized models in binary format produced by compliant Modelica environments, including Dymola, OpenModelica, and JModelica. It was suggested that this library could help FreeCAD connect to a Modelica system (forum topic).
Mumps is a generic solver for massive systems of equations, which generally deals with factorizing and operating on sparse matrices. It was mentioned in the forum: Test request, multiple solvers (forum topic).
It does not perform finite element analysis directly, but it may be used internally by other packages like Code-Aster.
Nastran is a structural analysis program developed by NASA in the 1970s. Modern versions of it are commercial products and closed source; however, older versions of it, Nastran-93 and Nastran-95 were released as open source in 2015. Forum post: Nastran (forum topic).
There is no technical support for the open source code, and it is probably difficult to compile in a modern system.
OpenSees is a software framework for developing applications to simulate structural and geotechnical systems mainly in the field of earthquake engineering. OpenSees, the Open System for Earthquake Engineering Simulation (forum topic) and Relicensing of OpenSees (forum topic).
PolyFEM is a simple C++ and Python finite element library. We provide a wide set of common partial differential equations including: Laplace, Helmholtz, Linear Elasticity, Saint-Venant Elasticity, Neo-Hookean Elasticity and Stokes. PolyFEM (forum topic).
Sparselizard is a fast, general, multiphysics, p-adaptive, open source C++ finite element library running on Linux, Mac and Windows. It is used to design next generation microdevices (ultrasound transducers, micromirrors, microvalves, comb drives,...) and it is carefully validated against analytical solutions, third party software and measurements of the fabricated devices. It looks like it is developed by the team of gmsh mesh generator.
SU2 is a collection of software tools developed in C++ and Python for the solution of partial differential equations (PDE) and PDE-constrained optimization problems on unstructured meshes. It is particularly used in the fields of aerodynamics and computational fluid dynamics (CFD).
Technog Professional is a closed source program to perform geotechnical simulations such as landslides, driving piles, slope stability, and civil engineering calculations (masonry and earthquake response), website (broken link).
Technog was successfully used in FreeCAD as a substitute of CalculiX, although the trial version is limited in the number of elements it can handle: Integration of tochnog solver in FreeCAD FEM (forum topic).